EIM Read Fix - Revision history

Thomas Peterson at 16:39, 13 July 2023

2023-07-13T16:39:11Z

← Older revision		Revision as of 16:39, 13 July 2023
Line 1:		Line 1:
	Some EIMs will not work very well on Modbus because the ~~respond with~~ messages too quickly. This causes intermittent callout and data issues where there are random missing values. This can be fixed with v2.26 by adjusting the read delay.		Some EIMs will not work very well on Modbus because the EIM responds to messages too quickly. This causes intermittent callout and data issues where there are random missing values. This can be fixed with v2.26 by adjusting the read delay.

	=== Updating ===		=== Updating ===

Thomas Peterson at 17:46, 6 July 2023

2023-07-06T17:46:50Z

← Older revision		Revision as of 17:46, 6 July 2023
Line 2:		Line 2:

	=== Updating ===		=== Updating ===
	If the EIM is not at v2.26 or newer (you can check ~~under~~ the "Access" button) it should be updated. See [[EIM Software Update]]		If the EIM is not at v2.26 or newer (you can check by pressing the "Access" button) it should be updated. See [[EIM Software Update]]

	The latest file can be found here, ~~EIM_update~~: [https://emittechnologies.sharepoint.com/:f:/g/EjzP5UrSAHxDraE3F2QH2k0BQf3zQZxxiSyI6cho1bxqPg Software Updates]		The latest file can be found here, download EIM_update_(...).tar: [https://emittechnologies.sharepoint.com/:f:/g/EjzP5UrSAHxDraE3F2QH2k0BQf3zQZxxiSyI6cho1bxqPg Software Updates]

	=== Adjusting the setting ===		=== Adjusting the setting ===

Thomas Peterson: Created page with "Some EIMs will not work very well on Modbus because the respond with messages too quickly. This causes intermittent callout and data issues where there are random missing values. This can be fixed with v2.26 by adjusting the read delay. === Updating === If the EIM is not at v2.26 or newer (you can check under the "Access" button) it should be updated. See EIM Software Update The latest file can be found here, EIM_update: [https://emittechnologies.sharepoint.c..."

2022-07-29T16:25:13Z

Created page with "Some EIMs will not work very well on Modbus because the respond with messages too quickly. This causes intermittent callout and data issues where there are random missing values. This can be fixed with v2.26 by adjusting the read delay. === Updating === If the EIM is not at v2.26 or newer (you can check under the "Access" button) it should be updated. See EIM Software Update The latest file can be found here, EIM_update: [https://emittechnologies.sharepoint.c..."

New page

Some EIMs will not work very well on Modbus because the respond with messages too quickly. This causes intermittent callout and data issues where there are random missing values. This can be fixed with v2.26 by adjusting the read delay.

=== Updating ===
If the EIM is not at v2.26 or newer (you can check under the "Access" button) it should be updated. See [[EIM Software Update]]

The latest file can be found here, EIM_update: [https://emittechnologies.sharepoint.com/:f:/g/EjzP5UrSAHxDraE3F2QH2k0BQf3zQZxxiSyI6cho1bxqPg Software Updates]

=== Adjusting the setting ===
After updating, navigate to "System Settings / Utilities" -> Modbus. The "Setup" password will be needed.

[[File:Eim-modbus-new.png]]

As seen above, a new setting called "Read Delay (ms)" is shown on the right.

Set the read delay to 75 ms, then hit Submit.

The Modbus should now communicate more reliably.