Resolving Time Issues - Revision history

Thomas Peterson: /* Dynamic Control Touchscreen (DCT) */

2023-03-30T18:01:47Z

Dynamic Control Touchscreen (DCT)

← Older revision		Revision as of 18:01, 30 March 2023
Line 3:		Line 3:
	== Dynamic Control Touchscreen (DCT) ==		== Dynamic Control Touchscreen (DCT) ==
	#Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, '''update the zone first before adjusting any time''' and hit Submit.		#Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, '''update the zone first before adjusting any time''' and hit Submit.
	#After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fixes the issue. If it is already set to YES and the time is wrong, change to NO and manually set the time to the current time.		#After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fixes the issue. If it is already set to YES and the time is wrong, change to NO and manually set the time to the current time at that location.

	== Data Relay (EDR) ==		== Data Relay (EDR) ==

Thomas Peterson at 18:01, 30 March 2023

2023-03-30T18:01:23Z

← Older revision		Revision as of 18:01, 30 March 2023
Line 2:		Line 2:

	== Dynamic Control Touchscreen (DCT) ==		== Dynamic Control Touchscreen (DCT) ==
	#Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, update the zone and hit Submit.		#Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, '''update the zone first before adjusting any time''' and hit Submit.
	#After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fixes the issue. If it is already set to YES and the time is wrong, change to NO and manually set the time to the current time.		#After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fixes the issue. If it is already set to YES and the time is wrong, change to NO and manually set the time to the current time.

Thomas Peterson: /* Data Relay (EDR) */

2022-07-29T17:06:46Z

Data Relay (EDR)

← Older revision		Revision as of 17:06, 29 July 2022
Line 10:		Line 10:

	#Check that the GPS antenna is connected and in the correct port		#Check that the GPS antenna is connected and in the correct port
	#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[~~EDR_Wi-Fi_Console#Software_Update~~\|this article]] on how to update.		#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[EDR_Software_Update\|this article]] on how to update.
	# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.		# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.

Thomas Peterson: /* Data Relay (EDR) */

2022-07-29T16:22:32Z

Data Relay (EDR)

← Older revision		Revision as of 16:22, 29 July 2022
Line 7:		Line 7:
	== Data Relay (EDR) ==		== Data Relay (EDR) ==

	Note: The latest software version of the EDR will show the current time under the Debug tab of the wifi terminal. To see how to connect to the wifi terminal, see [[EDR_Wi-~~Fi_Console_Pages~~\|this article]].		Note: The latest software version of the EDR will show the current time under the Debug tab of the wifi terminal. To see how to connect to the wifi terminal, see [[EDR_Wi-Fi_Console\|this article]].

	#Check that the GPS antenna is connected and in the correct port		#Check that the GPS antenna is connected and in the correct port
	#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[EDR_Wi-~~Fi_Console_Pages~~#Software_Update\|this article]] on how to update.		#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[EDR_Wi-Fi_Console#Software_Update\|this article]] on how to update.
	# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.		# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.

Thomas Peterson: /* Data Relay (EDR) */

2022-07-29T16:19:53Z

Data Relay (EDR)

← Older revision		Revision as of 16:19, 29 July 2022
Line 7:		Line 7:
	== Data Relay (EDR) ==		== Data Relay (EDR) ==

	Note: The latest software version of the EDR will show the current time under the Debug tab of the wifi terminal. To see how to connect to the wifi terminal, see this article.		Note: The latest software version of the EDR will show the current time under the Debug tab of the wifi terminal. To see how to connect to the wifi terminal, see [[EDR_Wi-Fi_Console_Pages\|this article]].

	#Check that the GPS antenna is connected and in the correct port		#Check that the GPS antenna is connected and in the correct port
	#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[EDR_Wi-Fi_Console_Pages#Software_Update\|this article]] on how to update.		#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[EDR_Wi-Fi_Console_Pages#Software_Update\|this article]] on how to update.
	# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.		# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.

Thomas Peterson: Created page with "Sometimes the time will be incorrect in callouts or reports for units. The resolution depends on the device type. == Dynamic Control Touchscreen (DCT) == #Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, update the zone and hit Submit. #After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fi..."

2022-07-29T16:19:31Z

Created page with "Sometimes the time will be incorrect in callouts or reports for units. The resolution depends on the device type. == Dynamic Control Touchscreen (DCT) == #Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, update the zone and hit Submit. #After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fi..."

New page

Sometimes the time will be incorrect in callouts or reports for units. The resolution depends on the device type.

== Dynamic Control Touchscreen (DCT) ==
#Navigate to the Time page on the sidebar. Verify that the time zone is correct. If the time zone is not correct, update the zone and hit Submit.
#After updating the time zone, see if the time matches the current time. If not, go back to the Time page. If "Set from GPS" is set to NO, try setting to YES and see if it fixes the issue. If it is already set to YES and the time is wrong, change to NO and manually set the time to the current time.

== Data Relay (EDR) ==

Note: The latest software version of the EDR will show the current time under the Debug tab of the wifi terminal. To see how to connect to the wifi terminal, see this article.

#Check that the GPS antenna is connected and in the correct port
#If the time is incorrect, the internal EDT may need to be updated. Check the EDT version on the Debug tab of the wifi console. It should be 1648 or newer. If it is not, see [[EDR_Wi-Fi_Console_Pages#Software_Update|this article]] on how to update.
# If only the time zone is incorrect on callouts, notify EMIT. This is a setting that is stored on the server.