DCT Recovery Mode: Difference between revisions
From EMIT Controls
(Created page with "==Overview== The DCT recovery mode is used to copy the last good software files. Symptoms that may be fixed by recovery mode: *DCT boots and shows Dynamic Control logo, but then doesn't do anything else *DCT boots to the app handler screen (with the progress bar) but never launches the main application or the main application crashes constantly ==How to use== #Turn off DCT #Press and hold button between modbus 1 and 2. #Power up DCT. #About 5 seconds after the boot...") |
|||
| Line 13: | Line 13: | ||
#Press and hold button between modbus 1 and 2. | #Press and hold button between modbus 1 and 2. | ||
#Power up DCT. | #Power up DCT. | ||
#About 5 seconds after the boot logo disappears, release button. | #About 5 seconds after the boot logo (Dynamic control) disappears, release button. | ||
#Within 20-30s the DCT should restart itself. If not, repeat the process. | #Within 20-30s the DCT should restart itself. If not, repeat the process. | ||
Latest revision as of 21:46, 21 November 2024
Overview
The DCT recovery mode is used to copy the last good software files.
Symptoms that may be fixed by recovery mode:
- DCT boots and shows Dynamic Control logo, but then doesn't do anything else
- DCT boots to the app handler screen (with the progress bar) but never launches the main application or the main application crashes constantly
How to use
- Turn off DCT
- Press and hold button between modbus 1 and 2.
- Power up DCT.
- About 5 seconds after the boot logo (Dynamic control) disappears, release button.
- Within 20-30s the DCT should restart itself. If not, repeat the process.
