Annunciator Output Testing - Revision history

Thomas Peterson at 22:00, 5 August 2022

2022-08-05T22:00:50Z

← Older revision		Revision as of 22:00, 5 August 2022
Line 1:		Line 1:
	=== ~~Overview~~ ===		=== Digital Out Testing===
	The digital out test screen is used to test the digital outputs (especially during install).		The digital out test screen is used to test the digital outputs (especially during install).

Line 11:		Line 11:

	If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately.		If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately.

			===Analog Out Testing===

			There is an analog output test page under Settings -> Brain -> "Output Status / Testing" -> "Analog Out Testing". It can be used for testing both Brain and Brain+ outputs.

			Depending on if an output is in voltage or current mode, a row for each output will give an option to force to several V or mA values. Press an option to force that value, then press "Clear Test" when done.

Thomas Peterson: Thomas Peterson moved page Annunciator Digital Out Test Screen to Annunciator Output Testing without leaving a redirect

2022-08-05T21:58:55Z

Thomas Peterson moved page Annunciator Digital Out Test Screen to Annunciator Output Testing without leaving a redirect

← Older revision	Revision as of 21:58, 5 August 2022
(No difference)

Thomas Peterson at 22:25, 4 August 2022

2022-08-04T22:25:57Z

← Older revision		Revision as of 22:25, 4 August 2022
Line 1:		Line 1:
	=== Overview ===		=== Overview ===
	The ~~annunciator~~ digital out test screen is used to test the digital outputs (especially during install).		The digital out test screen is used to test the digital outputs (especially during install).

	The screen is reached from the ~~annunciator~~ home page by selecting ~~"Annunciator Setup"~~ -> "~~Annunciator~~ Output Status / Testing" -> "Digital Out Testing"		The screen is reached from the home page by selecting Settings -> Brain -> "Output Status / Testing" -> "Digital Out Testing"

	[[File:Core Test Digital Out.jpg]]		[[File:Core Test Digital Out.jpg]]

	To use this page, the ~~annunciator~~ must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.		To use this page, the system must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.

	Select "Clear Test / Done" to remove all forced commands and return the outputs to their normal state. (Note: Some outputs will still be normally on when the ~~annunciator~~ is stopped, such as hot start).		Select "Clear Test / Done" to remove all forced commands and return the outputs to their normal state. (Note: Some outputs will still be normally on when the unit is stopped, such as hot start).

	If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately.		If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately.

Sean Sanders at 20:02, 2 August 2022

2022-08-02T20:02:55Z

← Older revision		Revision as of 20:02, 2 August 2022
Line 4:		Line 4:
	The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"		The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"

	<nowiki></nowiki>Insert Image		[[File:Core Test Digital Out.jpg]]

	To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.		To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.

Sean Sanders at 19:16, 2 August 2022

2022-08-02T19:16:31Z

← Older revision		Revision as of 19:16, 2 August 2022
Line 3:		Line 3:

	The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"		The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"

			<nowiki></nowiki>Insert Image

	To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.		To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.

Sean Sanders at 19:13, 2 August 2022

2022-08-02T19:13:18Z

← Older revision		Revision as of 19:13, 2 August 2022
Line 2:		Line 2:
	The annunciator digital out test screen is used to test the digital outputs (especially during install).		The annunciator digital out test screen is used to test the digital outputs (especially during install).

	The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"		The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"

	<nowiki></nowiki>Insert Image

	To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.		To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.

Sean Sanders: Created page with "=== Overview === The annunciator digital out test screen is used to test the digital outputs (especially during install). The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing" Insert Image To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing. Select "Clear Test / Do..."

2022-07-21T21:25:49Z

Created page with "=== Overview === The annunciator digital out test screen is used to test the digital outputs (especially during install). The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing" <nowiki>*</nowiki>Insert Image* To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing. Select "Clear Test / Do..."

New page

=== Overview ===
The annunciator digital out test screen is used to test the digital outputs (especially during install).

The screen is reached from the annunciator home page by selecting "Annunciator Setup" -> "Annunciator Output Status / Testing" -> "Digital Out Testing"

<nowiki>*</nowiki>Insert Image*

To use this page, the annunciator must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.

Select "Clear Test / Done" to remove all forced commands and return the outputs to their normal state. (Note: Some outputs will still be normally on when the annunciator is stopped, such as hot start).

If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately.