View source for Annunciator Setup - Custom Digital Out

The annunciator has the ability to turn the digital outputs on and off based on a user-defined sensor condition. Any digital out that is not in use by another function can have a custom function associated with it.

The custom digital out function is configured by selecting "Annunciator Setup", "Outputs Setup", then "Custom Digital Outs".

<nowiki>*</nowiki>Insert Image* 

''Custom Digital Output Setup''

Select the top button of the page to select an output to configure. Only outputs that have no function or already have a custom digital out can be selected.

For a given output, select the top button of the lower section to define a condition when the output should be on. This can be any condition dependent on other inputs. Also available is a delay before/after the sensor condition is true/false for the output to activate or deactivate.