Connecting EDR to EIM with Ethernet: Revision history

From EMIT Controls

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

3 April 2024

10 October 2023

29 July 2022

  • curprev 17:2217:22, 29 July 2022‎ Thomas Peterson talk contribs‎ 1,004 bytes +1,004‎ Created page with "Instead of using RS-485, the EDR can be connected to the EIM with an ethernet cable. If an ethernet switch is not present:  Use a crossover ethernet cable between the EDR and EIM If an ethernet switch is present: Use 2 normal ethernet cables from the switch to each the EDR and EIM ===EIM Setup=== #Go to system/Global settings -> Ethernet #Change the type on top to 'Manual' #Set the IP address to 172.16.1.5 #Set the gateway to 172.16.1.6 #Set the sub..."
Retrieved from "http://data.emittechnologies.com/wiki/index.php?title=Connecting_EDR_to_EIM_with_Ethernet"