Spare Parts Reference: Difference between revisions
Tag: Manual revert |
|||
(19 intermediate revisions by the same user not shown) | |||
Line 207: | Line 207: | ||
| [[File:14097.jpg|200px]] || 14097 || CAT3406 ETB Assy || 3406NA CAT | | [[File:14097.jpg|200px]] || 14097 || CAT3406 ETB Assy || 3406NA CAT | ||
|- | |- | ||
| | | [[File:14105.JPG|200px]] || 14105 || CAT3408TA ETB Assy || 3408TA CAT | ||
|- | |- | ||
| [[File:14107-0001.JPG|200px]] || 14107-0001 || CAT3408NA ETB Assy || 3408NA CAT | | [[File:14107-0001.JPG|200px]] || 14107-0001 || CAT3408NA ETB Assy || 3408NA CAT | ||
Line 215: | Line 215: | ||
| [[File:14093.jpg|200px]] || 14093 || Arrow VRG330CF ETB Mixer Assy || VRG330 CF | | [[File:14093.jpg|200px]] || 14093 || Arrow VRG330CF ETB Mixer Assy || VRG330 CF | ||
|- | |- | ||
| | | [[File:14122.JPG|200px]] || 14122 || Cummins G5.9 ETB Mixer Assy || Cummins 5.9 | ||
|- | |- | ||
| | | [[File:14127.JPG|200px]] || 14127 || Cummins G8.3 ETB Mixer Assy || Cummins 8.3 | ||
|- | |- | ||
| [[File:14129b.jpg|200px]] || 14129 || Cummins KTA19 ETB Assy || Cummins KTA-19 | | [[File:14129b.jpg|200px]] || 14129 || Cummins KTA19 ETB Assy || Cummins KTA-19 | ||
|- | |- | ||
| <None> || 17011-2006 || Cummins G855NA ETB Mixer Assy || Cummins G855NA | | <None> || 17011-2006 || Cummins G855NA ETB Mixer Assy || Cummins G855NA | ||
|- | |||
| [[File:17011-2007b.jpg|200px]] || 17011-2007 || Cummins GTA855 ETB Mixer Assy (Note: Not fully itemized) || Cummins GTA855 | |||
|- | |- | ||
| <None> || 17011-2008 || Arrow A43 ETB Mixer Assy || Arrow A43/VRG260 | | <None> || 17011-2008 || Arrow A43 ETB Mixer Assy || Arrow A43/VRG260 | ||
|- | |- | ||
| | | [[File:14453.JPG|200px]] || 14453 || Waukesha F1197G ETB assy || Wauk F1197 | ||
|} | |} | ||
Line 251: | Line 253: | ||
| [[File:17010-0004.JPG|200px]] || 17010-0004 || Arm for 2040 || 17010-0002 | | [[File:17010-0004.JPG|200px]] || 17010-0004 || Arm for 2040 || 17010-0002 | ||
|- | |- | ||
| [[File:17010-0005.JPG|200px]] || 17010- | | [[File:17010-0005.JPG|200px]] || 17010-0010 || 2080 external actuator. Note: At one time there was a duplicate item nubmer 17010-0005 || Wauk VHP | ||
|- | |- | ||
| [[File:17010-0006.jpg|200px]] || 17010-0006 || Arm for 2080 || 17010- | | [[File:17010-0006.jpg|200px]] || 17010-0006 || Arm for 2080 || 17010-0010 | ||
|- | |- | ||
| [[File:17113-0013.jpg|200px]] || 17113-0013 || Servo mount kit for 3412C || CAT 3412 mount for 17010-0002 | | [[File:17113-0013.jpg|200px]] || 17113-0013 || Servo mount kit for 3412C || CAT 3412 mount for 17010-0002 | ||
Line 259: | Line 261: | ||
| [[File:17113-0014.JPG|200px]] || 17113-0014 || Linkage for 2040 on 3412 || CAT 3412 linkage from 17010-0004 to engine | | [[File:17113-0014.JPG|200px]] || 17113-0014 || Linkage for 2040 on 3412 || CAT 3412 linkage from 17010-0004 to engine | ||
|- | |- | ||
| [[File:17113-0015.jpg|200px]] || 17113-0015 || 7044 Servo mount || 17010- | | [[File:17113-0015.jpg|200px]] || 17113-0015 || 7044 Servo mount || 17010-0010 mount on Wauk 7044 | ||
|- | |- | ||
| [[File:17113-0016.jpg|200px]] || 17113-0016 || 7044 Servo linkage || Linkage from 17010-0006 to engine | | [[File:17113-0016.jpg|200px]] || 17113-0016 || 7044 Servo linkage || Linkage from 17010-0006 to engine | ||
Line 363: | Line 365: | ||
|- | |- | ||
| [[File:20290-0002.jpg|200px]] || 20290-0002 || Aux Pickup, 2:1 || 399 CAT, 379 CAT, 3400 CAT, 3500 CAT | | [[File:20290-0002.jpg|200px]] || 20290-0002 || Aux Pickup, 2:1 || 399 CAT, 379 CAT, 3400 CAT, 3500 CAT | ||
|- | |||
| [[File:65300-6338-Aj.jpg|200px]] || 65300-6338-A || Timing Disc Retrofit Kit for 330xA || 3304 A, 3306 A CAT, see also [[330xA Timing Disc Installation]] | |||
|} | |} | ||
Line 460: | Line 464: | ||
| <None> || 15639-1215 || ICM 12-cyl harness A || CAT 398 | | <None> || 15639-1215 || ICM 12-cyl harness A || CAT 398 | ||
|- | |- | ||
| <None> || 64595-0132 || 3306 Coil Harness bracket || All 3306, for attaching harness | | <None> || 64595-0132 || 3306 Coil Harness bracket || All 3306, for attaching harness. Note old item number was 64595-0133. | ||
|} | |} | ||
Line 591: | Line 595: | ||
| <None> || 15657-0005 || ECU Coil Harness KTA19 || KTA19 | | <None> || 15657-0005 || ECU Coil Harness KTA19 || KTA19 | ||
|- | |- | ||
| <None> || 64595-0132 || 3306 Coil Harness bracket || All 3306, for attaching harness, used in addition to 15657-xxxx | | <None> || 64595-0132 || 3306 Coil Harness bracket || All 3306, for attaching harness, used in addition to 15657-xxxx. Note old item number was 64595-0133. | ||
|} | |} | ||
Line 647: | Line 651: | ||
| <None> || 15658-0001 || ECU Exhaust Harness, manifold mount catalyst, 6' pre / 8' post || Manifold mount catalyst | | <None> || 15658-0001 || ECU Exhaust Harness, manifold mount catalyst, 6' pre / 8' post || Manifold mount catalyst | ||
|- | |- | ||
| <None> || 15658-0002 || ECU exhaust harness, 5' pre O2, 26' post || | | <None> || 15658-0002 || ECU exhaust harness, 25' (At one time this was 5' pre O2, 26' post) || All sensors at 25' | ||
|- | |- | ||
| <None> || 15658-0003 || ECU exhaust harness, 15' Pre O2, 28' Post || Pre O2 near engine and Post O2 + TCs at cooler | | <None> || 15658-0003 || ECU exhaust harness, 15' Pre O2, 28' Post || Pre O2 near engine and Post O2 + TCs at cooler | ||
Line 663: | Line 667: | ||
! Image !! EMIT P/Ns !! Description !! For Use With | ! Image !! EMIT P/Ns !! Description !! For Use With | ||
|- | |- | ||
| | | Note: Fasteners included with kit are not shown here [[File:20393-0006.JPG|200px|caption]] || 20393-0008 || MOUNTING KIT, ECU: CAT3306A || 3306A NA/TA | ||
|- | |- | ||
| | | [[File:20393-0001.JPG|200px]] || 20393-0001 || ECU MOUNTING KIT: CAT 3306B || 3306B NA/TA | ||
|} | |} | ||
Line 928: | Line 932: | ||
|- | |- | ||
| <None> || 14401-0063 || PRE-STRAINER SUCTION, DATA TAG || | | <None> || 14401-0063 || PRE-STRAINER SUCTION, DATA TAG || | ||
|- | |||
| <None> || 65300-6350 || Battery saver kit || Add-on to make panel shut off after unit stops | |||
|- | |||
| <None> || 14385-0002 || Door latch for ADEM box || | |||
|- | |||
| <None> || 65300-2231 || Panel Hinge | |||
|- | |||
| <None> || 14385 || Outer door latch | |||
|} | |} | ||
Line 1,022: | Line 1,034: | ||
| [[File:20413-0002.JPG|200px]] || 20413-0002 || Shark fin mounting bracket and U bolts || 20374-0001 mounting (included in EDR kit) | | [[File:20413-0002.JPG|200px]] || 20413-0002 || Shark fin mounting bracket and U bolts || 20374-0001 mounting (included in EDR kit) | ||
|- | |- | ||
| | | <None> || 20381-0100 || (Old kit) Directional antenna with separate 25' coax and adapters || | ||
|- | |- | ||
| | | [[File:20381-0100.JPG|200px]] || 20016-0002 || Directional antenna with about 33' coax || | ||
|- | |- | ||
| [[File:20381-0011.JPG|200px]] || 20381-0011 || GPS standalone antenna || | | [[File:20381-0011.JPG|200px]] || 20381-0011 || GPS standalone antenna || | ||
Line 1,059: | Line 1,071: | ||
|- | |- | ||
| [[File:20411-0004.JPG|200px]] || 20411-0004 || Satellite modem || Not commonly ordered, would usually use kit above instead | | [[File:20411-0004.JPG|200px]] || 20411-0004 || Satellite modem || Not commonly ordered, would usually use kit above instead | ||
|} | |||
==Vibration Sensor== | |||
{| class="wikitable" style="margin:auto" | |||
|+ | |||
|- | |||
! Image !! EMIT P/Ns !! Description !! For Use With | |||
|- | |||
| <None> || 20400 || Vibration Sensor Module || | |||
|} | |} |
Revision as of 13:10, 11 April 2024
This page lists parts related to each module category. Navigate to a module section to see parts related to that product.
AFRC
Modules
O2 Sensors
Valves / DPVs
Thermocouples
Other AFRC Sensors
AFRC Harnesses
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15507 | Wideband O2 harness, armored, 25’ | EMIT 13019 |
<None> | 15508 | Wideband O2 harness, armored, 50’ | EMIT 13019 |
<None> | 15073 | Narrowband O2 harness, armored, 25’ | EMIT 13009 |
<None> | 15075 | Narrowband O2 harness, armored, 50’ | EMIT 13009 |
<None> | 15077 | Narrowband O2 harness, armored, 100’ | EMIT 13009 |
<None> | 15087 | Narrowband O2 harness, no plug, armored 25’ | EMIT 13010 |
<None> | 15088 | Narrowband O2 harness, no plug, armored 50’ | EMIT 13010 |
<None> | 15089 | Narrowband O2 harness, no plug, armored 100’ | EMIT 13010 |
<None> | 15137 | Narrowband O2 harness for C1D2 circular plug O2 sensor 25' | EMIT 13038 |
<None> | 15138 | Narrowband O2 harness for C1D2 circular plug O2 sensor 50' | EMIT 13038 |
<None> | 15139 | Narrowband O2 harness for C1D2 circular plug O2 sensor 100' | EMIT 13038 |
<None> | 15072 | DPV Harness, armored 25’ | Any non-C1D2 valve |
<None> | 15074 | DPV Harness, armored 50’ | Any non-C1D2 valve |
<None> | 15076 | DPV Harness, armored 100’ | Any non-C1D2 valve |
<None> | 15087 | DPV harness, no plug, armored 25’ | Any C1D2 valve |
<None> | 15088 | DPV harness, no plug, armored 50’ | Any C1D2 valve |
<None> | 15089 | DPV harness, no plug, armored 100’ | Any C1D2 valve |
<None> | 15511 | Power / Comm harness 1 ft | Any module |
<None> | 15512 | Power / Comm harness 10 ft | Any module |
<None> | 15513 | Power / Comm harness 20 ft | Any module |
<None> | 15500 | Sensor harness, armored 25’ | EMIT 13207 or 12208 |
<None> | 15501 | Sensor harness, armored 50’ | EMIT 13207 or 12208 |
<None> | 15503 | Sensor harness, armored 75’ | EMIT 13207 or 12208 |
<None> | 15502 | Sensor harness, armored 100’ | EMIT 13207 or 12208 |
Tetraglass
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 56003 | Tetraglass tape with psa 1.5" x 1/8" x 100' | |
<None> | 56005 | Tetraglass tape with psa 3" x 1/8" x 100' | |
<None> | 56007 | Tetraglass tape with psa 3.5" x 1/8" x 100' | |
<None> | 56067 | Tetraglass tape with psa 1.5" x 1/8" x 100' with holes | |
<None> | 56009 | Cer-wool 3.0" x 1/2" x 25' |
Speed (Governor)
Modules
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
20310 | Speed control module |
Throttle / Mixer Assmblies
Mag Pickups
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
13211 | Standard 2" MPU | Most small HP engines | |
<None> | 13243 | 3" MPU with weatherpak plug | 3400 series CAT, 300 series CAT, KTA-19 |
External Actuators and Related
Harnesses
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15646 | Throttle harness, armored, 25 ft | Any throttle assembly under "Throttle / Mixer Assemblies" |
<None> | 15646-0001 | Throttle harness, armored, 50 ft | Any throttle assembly under "Throttle / Mixer Assemblies" |
<None> | 15646-0002 | Throttle harness, armored, 75 ft | Any throttle assembly under "Throttle / Mixer Assemblies" |
<None> | 15550-0002 | Actuator harness, 10 pin, 50 ft armored | Heiznmann 10-pin external actuator, Waukesha VHP |
<None> | 15625-2500 | Actuator harness, 5 pin, 25 ft armored | Heiznmann 5-pin external actuator (17010-0002) |
<None> | 15625-5000 | Actuator harness, 5 pin, 50 ft armored | Heiznmann 5-pin external actuator (17010-0002) |
<None> | 15629-0400 | 4 ft MPU cable f/ std MPU | EMIT 13211 or 13243 Mag Pickup |
<None> | 15629-0800 | 8 ft MPU cable f/ std MPU | EMIT 13211 or 13243 Mag Pickup |
<None> | 15629-1200 | 12 ft MPU cable f/ std MPU | EMIT 13211 or 13243 Mag Pickup |
<None> | 15511 | Power / Comm harness 1 ft | Any module |
<None> | 15512 | Power / Comm harness 10 ft | Any module |
<None> | 15513 | Power / Comm harness 20 ft | Any module |
Panel Switch Kit
Note: This is only used if installing in a non-EMIT panel
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 14361 | Governor Switch Panel, Horizontal | |
<None> | 14362 | Governor Switch Panel, Vertical |
Misc Governor Components
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
17113-0011 | Air Cleaner Bracket, CAT3304/3304B | 3304 and 3304B CAT | |
17413-0030 | Pressure Regulator Support Bracket, CAT3304/3304B | 3304 and 3304B CAT |
Ignition
Modules
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
20270-0002 | ICM-8 | Up to 8 cylinder engines | |
20270-0003 | ICM-16 | Up to 16 cylinder engines |
Speed and Timing Sensors
Note: Any Ignition installation will use one Flywheel mag pickup and one additional MPU or hall sensor
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
13211 | Standard 2" MPU | Most small HP engines | |
13242 | 3" MPU to circular connector | 3400, 300 series CAT , KTA-19 | |
Note: Below image doesn't show bracket and screw | 13240-0002 | 330x Hall sensor, bracket, screw | 3304B, 3306B CAT |
13241 | 5/8" Threaded hall sensor | 3400 CAT, Waukesha VHP, Cummins engines if a bushing is used | |
<None> | 13264 | M12 threaded hall sensor | Timing disc kit, eg 3306A |
65300-6282-A | 3/4 to 5/8 bushing | Cummins engines to adapt 13241 to the engine | |
20290-0003 | Aux Pickup, 3:1 | 3300 A CAT, 398 CAT | |
20290-0002 | Aux Pickup, 2:1 | 399 CAT, 379 CAT, 3400 CAT, 3500 CAT | |
65300-6338-A | Timing Disc Retrofit Kit for 330xA | 3304 A, 3306 A CAT, see also 330xA Timing Disc Installation |
Speed and Timing Harnesses
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15629-0400 | 4 ft MPU cable f/ std MPU | EMIT 13211 |
<None> | 15629-0800 | 8 ft MPU cable f/ std MPU | EMIT 13211 |
<None> | 15629-1200 | 12 ft MPU cable f/ std MPU | EMIT 13211 |
<None> | 15654-0800 | 8 ft MPU cable f/ long MPU | EMIT 13242 |
<None> | 15654-1200 | 12 ft MPU cable f /long MPU | EMIT 13242 |
<None> | 15654-1600 | 16 ft MPU cable f /long MPU | EMIT 13242 |
<None> | 15654-2000 | 20 ft MPU cable f /long MPU | EMIT 13242 |
<None> | 15620-0400 | Hall sensor harness, 330xB, 4 ft | EMIT 13240-0002 |
<None> | 15620-0800 | Hall sensor harness, 330xB, 8 ft | EMIT 13240-0002 |
<None> | 15620-1200 | Hall sensor harness, 330xB, 12 ft | EMIT 13240-0002 |
<None> | 15628-0450 | Hall sensor harness, 4.5 ft | EMIT 13241 or 13264 |
<None> | 15628-1000 | Hall sensor harness, 10 ft | EMIT 13241 or 13264 |
<None> | 15637-0040 | Cummins MPU harness, 4 ft | Stock Cummins Timing Sensor |
<None> | 15637-0080 | Cummins MPU harness, 8 ft | Stock Cummins Timing Sensor |
<None> | 15637-0120 | Cummins MPU harness, 12 ft | Stock Cummins Timing Sensor |
<None> | 15637-0160 | Cummins MPU harness, 16 ft | Stock Cummins Timing Sensor |
<None> | 15650-0800 | Aux Pickup harness, 8 ft | EMIT Aux Pickups |
<None> | 15650-1200 | Aux Pickup harness, 12 ft | EMIT Aux Pickups |
<None> | 15650-1600 | Aux Pickup harness, 16 ft | EMIT Aux Pickups |
Power/Comm Harness
The power/comm harness is used to connect the ICM to the panel. The unarmored version might be more convenient if running through conduit.
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15633-0251 | ICM Power/Comm harness, armored, 25 ft | Any ICM |
<None> | 15633-0501 | ICM Power/Comm harness, armored, 50 ft | Any ICM |
<None> | 15633-0250 | ICM Power/Comm harness, unarmored, 25 ft | Any ICM |
<None> | 15633-0500 | ICM Power/Comm harness, unarmored, 50 ft | Any ICM |
Coil harnesses
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15639-4120 | ICM 4-cyl harness A | |
<None> | 15639-4001 | ICM 4-cyl harness B | CAT 3304 |
<None> | 15639-6120 | ICM 6-cyl harness A | |
<None> | 15639-6093 | ICM 6-cyl harness B | |
<None> | 15639-6068 | ICM 6-cyl harness C | |
<None> | 15639-6001 | ICM 6-cyl harness D | CAT 3306 |
<None> | 15639-6043 | ICM 6-cyl harness E | |
<None> | 15639-6065 | ICM 6-cyl harness F | Cummins KTA19 |
<None> | 15639-6095 | ICM 6-cyl harness G | CAT 3406 |
<None> | 15639-8120 | ICM 8-cyl harness A | CAT 3408 |
<None> | 15639-8150 | ICM 8-cyl harness B | CAT 379 |
<None> | 15639-1215 | ICM 12-cyl harness A | CAT 398 |
<None> | 64595-0132 | 3306 Coil Harness bracket | All 3306, for attaching harness. Note old item number was 64595-0133. |
Ignition Coils
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
14330-0001 | Standard ignition coil | ||
14330-0002 | Flanged ignition coil | Waukesha VHP |
Secondaries
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 14332-0001 | Spark Plug Wire, 12in Lead, 4in Est, 7mm, Str/Str F/ CAT 3300 | 3300 CAT |
<None> | 14332-0007 | Secondary Lead, Resistive Suppression, CAT 3400 | 3400 CAT |
<None> | 14332-0005 | Secondary Lead, Resistive Suppression, ARROW VRG330 | Arrow VRG 330 |
<None> | 14332-0008 | Secondary Lead, Resistive Suppression, Cummins G5.9 | Cummins 5.9 |
<None> | 14332-0009 | Secondary Lead, Resistive Suppression, Cummins G8.3 | Cummins 8.3 |
<None> | 14332-0010 | Secondary Lead, Resistive Suppression, Cummins KTA19 | Cummins KTA19 |
<None> | 14092-0001 | Cat300 ignition secondary | CAT 398 (To be confirmed) |
<None> | 14332-0011 | SECONDARY LEAD, RESISTIVE SUPPRESSION, CUMMINS G/GTA855 | G/GTA855 |
<None> | 14332-0012 | SECONDARY LEAD, RESISTIVE SUPPRESSION, ARROW VRG220 | VRG220 |
Spark Plugs
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 14331-0001 | Spark plug 14mm x 19mm | 3300 CAT, VRG330, |
<None> | 14331-0005 | Spark plug f/ CAT 3400 | 3400 CAT |
<None> | 14331-0006 | Spark plug f/ Cummins 5.9 | Cummins 5.9 |
<None> | 14331-0007 | Spark plug f/ Cummins 8.3 | Cummins 8.3 |
<None> | 14331-0008 | Spark plug f/ Cummins KTA19 | Cummins KTA19 |
Mount Brackets
ECU
Modules
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
20390 | ECU Module |
Engine End Devices
For Mixer assemblies, see above
For ignition mag pickups and hall sensors, see above
For ignition coils see above
For ignition secondaries see above
For ignition spark plugs see above
For O2 sensors see above
For DPVs see above
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 13062-0001 | Thermocouple 3' to quick disconnect | Pre/Post cat temp on ECU |
<None> | 13063 | ECU Manifold Pressure sensor | |
<None> | 13064 | ECU Oil Pressure sensor | |
<None> | 13255-0001 | Thermistor to 1/4" NPT | Coolant and Oil temp |
ECU Coil Harness
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15657-0001 | ECU Coil Harness 6 cyl 33" | 3306B, G855, QSL9 |
<None> | 15657-0003 | ECU Coil Harness 6 cyl 54" | 3306A |
<None> | 15657-0005 | ECU Coil Harness KTA19 | KTA19 |
<None> | 64595-0132 | 3306 Coil Harness bracket | All 3306, for attaching harness, used in addition to 15657-xxxx. Note old item number was 64595-0133. |
ECU Panel Harnesses
The panel harness runs from the ECU back to the panel. The length required depends on how far the ECU is mounted from the panel.
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15656-0001 | ECU Panel Harness 20' | |
<None> | 15656-0002 | ECU Panel Harness 10' | |
<None> | 15656-0003 | ECU Panel Harness Injection only 10' | |
<None> | 15656-0004 | ECU Panel Harness 28' |
ECU Engine Harness
Note: Another page shows connector pinouts and parts here: ECU_Connector_Pinouts
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15655-0001 | ECU Engine Harness 3306B NA | 330xB NA |
<None> | 15655-0003 | ECU Engine Harness 3306A TA | 330xA TA, hall sensor used for CAM disc |
<None> | 15655-0004 | ECU Engine Harness 3306B TA | 330xB TA |
<None> | 15655-0005 | ECU Engine Harness G855 | G855 |
<None> | 15655-0006 | ECU Engine Harness KTA-19 | KTA-19 |
<None> | 15655-0007 | ECU Engine Harness QSL9 | QSL9 |
<None> | 15655-0008 | ECU Engine Harness 330xA NA | 330x NA, hall sensor used for CAM disc |
ECU Exhaust Harness
For a given engine, the exhaust harness that will be needed depends on what catalyst is used and how it is arranged. Note the lengths mentioned below to help select the harness.
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15658-0001 | ECU Exhaust Harness, manifold mount catalyst, 6' pre / 8' post | Manifold mount catalyst |
<None> | 15658-0002 | ECU exhaust harness, 25' (At one time this was 5' pre O2, 26' post) | All sensors at 25' |
<None> | 15658-0003 | ECU exhaust harness, 15' Pre O2, 28' Post | Pre O2 near engine and Post O2 + TCs at cooler |
<None> | 15658-0004 | ECU exhaust harness, 31' | All sensors at 31' |
<None> | 15658-0005 | ECU exhaust harness, 26' | All sensors at 26' |
ECU Mount Kits
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
Note: Fasteners included with kit are not shown here | 20393-0008 | MOUNTING KIT, ECU: CAT3306A | 3306A NA/TA |
20393-0001 | ECU MOUNTING KIT: CAT 3306B | 3306B NA/TA |
Panel
Panserts
The pansert is what goes on the inner door to accept the engine control box.
Pressure Sensors
Panel Mounted (to wire leads)
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 13202 | PRESSURE TRANSDUCER, -14.7 to +30 PSIG | Manifold Pressure |
<None> | 13050 | PRESSURE TRANSDUCER, 0-100 PSIG | |
<None> | 13051 | PRESSURE TRANSDUCER, 0-300 PSIG | |
<None> | 13052 | PRESSURE TRANSDUCER, 0-500 PSIG | |
<None> | 13053 | PRESSURE TRANSDUCER, 0-1000 PSIG | |
<None> | 13054 | PRESSURE TRANSDUCER, 0-1500 PSIG | |
<None> | 13055 | PRESSURE TRANSDUCER, 0-2000 PSIG | |
<None> | 13056 | PRESSURE TRANSDUCER, 0-3000 PSIG | |
<None> | 13069 | PRESSURE TRANSDUCER, 0-5 PSIG |
Remote Mounted (With plug)
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 13207 PRESSURE TRANSDUCER, -14.7 to +30 PSIG WITH PLUG | Manifold Pressure | |
<None> | 13244 PRESSURE TRANSDUCER, 0-100 PSIG WITH PLUG | ||
<None> | 13245 PRESSURE TRANSDUCER, 0-300 PSIG WITH PLUG | ||
<None> | 13246 PRESSURE TRANSDUCER, 0-500 PSIG WITH PLUG | ||
<None> | 13247 PRESSURE TRANSDUCER, 0-1000 PSIG WITH PLUG | ||
<None> | 13248 PRESSURE TRANSDUCER, 0-1500 PSIG WITH PLUG | ||
<None> | 13249 PRESSURE TRANSDUCER, 0-2000 PSIG WITH PLUG | ||
<None> | 13250 PRESSURE TRANSDUCER, 0-3000 PSIG WITH PLUG | ||
<None> | 13259 PRESSURE TRANSDUCER, 0-5 PSIG WITH PLUG |
Pressure Sensor Harnesses, for above remote mounted option
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 15500 | SENSOR HARNESS 25 FT ARMORED | |
<None> | 15501 | SENSOR HARNESS 50 FT ARMORED | |
<None> | 15503 | SENSOR HARNESS 75 FT ARMORED | |
<None> | 15502 | SENSOR HARNESS 100 FT ARMORED |
Other End Devices
Panel Internal Parts
Mount Kits
Mount kits are used if installing component(s) on non-EMIT Panels
Misc Module Components
The following components are used on multiple modules. Note that straight plugs are used with DIN modules (Brain, AFRC, etc.) and angled plugs are used with screens (DCT, EIM).
Telematics
EDR Modules and Kits
Antennas and Related Parts
Modems
Vibration Sensor
Image | EMIT P/Ns | Description | For Use With |
---|---|---|---|
<None> | 20400 | Vibration Sensor Module |