Viewing Brain Configuration Warnings: Difference between revisions

From EMIT Controls
Line 5: Line 5:
==Viewing Warnings==
==Viewing Warnings==


From the Connect home page, normally the starting page will be Units - List. Select the "Overview" tab on the lower section.
Normally the home page on [https://data.emittechnologies.com/ Connect] starts at Units - List. Select the "Overview" tab on the lower section to go to the overview section instead.


[[File:Connect unit overview highlight.png|border]]
[[File:Connect unit overview highlight.png|border]]

Revision as of 14:11, 29 June 2023

Overview

DCT Panels that are actively on telematics will send the Brain (annunciator) configuration file once a day. This has several uses, including retrieving backups and viewing setpoint changes. Additionally, the site will generate warnings when configuration values are potentially bad so that they can be reviewed. This page discusses how to find the warnings and what causes a warning.

Viewing Warnings

Normally the home page on Connect starts at Units - List. Select the "Overview" tab on the lower section to go to the overview section instead.

Connect unit overview highlight.png

This will go to some unit summary information. The lower left box will show units with configuration warnings.

Connect unit issues.png

From this box, select a unit with a warning to jump to that unit dashboard. Then, select the "Panel Configuration" tab along the top to see the units configuration warnings.

Connect unit warning.png