Speed Sensor Setup: Difference between revisions
From EMIT Controls
Sean Sanders (talk | contribs) (Created page with "The Governor Sensor Setup page (Pg. 520) specifies the pressure sensor settings. This duplicates the functionality on setup step 4. An access level of Setup or higher is needed to see this screen. For each sensor used, specify the low and high PSI value that corresponds to the input that causes an output of 4mA and 20mA respectively. This information can be found stamped on the sensor itself.") |
Sean Sanders (talk | contribs) m (Sean Sanders moved page Sensor Setup to Speed Sensor Setup) |
(No difference)
| |
Revision as of 19:01, 26 July 2022
The Governor Sensor Setup page (Pg. 520) specifies the pressure sensor settings. This duplicates the functionality on setup step 4. An access level of Setup or higher is needed to see this screen.
For each sensor used, specify the low and high PSI value that corresponds to the input that causes an output of 4mA and 20mA respectively. This information can be found stamped on the sensor itself.
