Annunciator Output Testing: Difference between revisions
From EMIT Controls
Sean Sanders (talk | contribs) No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=== Overview === | === Overview === | ||
The | The digital out test screen is used to test the digital outputs (especially during install). | ||
The screen is reached from the | The screen is reached from the home page by selecting Settings -> Brain -> "Output Status / Testing" -> "Digital Out Testing" | ||
[[File:Core Test Digital Out.jpg]] | [[File:Core Test Digital Out.jpg]] | ||
To use this page, the | To use this page, the system must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing. | ||
Select "Clear Test / Done" to remove all forced commands and return the outputs to their normal state. (Note: Some outputs will still be normally on when the | Select "Clear Test / Done" to remove all forced commands and return the outputs to their normal state. (Note: Some outputs will still be normally on when the unit is stopped, such as hot start). | ||
If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately. | If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately. | ||
Revision as of 22:25, 4 August 2022
Overview
The digital out test screen is used to test the digital outputs (especially during install).
The screen is reached from the home page by selecting Settings -> Brain -> "Output Status / Testing" -> "Digital Out Testing"
To use this page, the system must be in a stopped state. Select "Force ON" or "Force OFF" to force an output to that level for testing.
Select "Clear Test / Done" to remove all forced commands and return the outputs to their normal state. (Note: Some outputs will still be normally on when the unit is stopped, such as hot start).
If "RESET" or "STOP" is ever pressed on the panel, all forced output states will be cleared immediately.
