This page lists parts related to each module category. Navigate to a module section to see parts related to that product.
AFRC
Modules
Image |
EMIT P/Ns |
Description |
For Use With
|
|
20360 |
AFRC Advanced, Single bank narrowband |
Single bank narrowband (richburn) applications
|
|
20230 |
AFRC Advanced, Dual bank wideband or narrowband |
Single/Dual wide/narrowband applications
|
|
20235 |
AFRC Advanced, Dual bank narrowband |
Single/Dual narrowband applications
|
O2 Sensors
Image |
EMIT P/Ns |
Description |
For Use With
|
|
13009 |
Standard Narrowband O2 Sensor (4 pin) |
Normal richburn applications
|
|
13019 |
Standard Wideband O2 Sensor (6 pin) |
Normal leanburn applications
|
|
13010 |
Narrowband O2 Sensor to wire leads |
Narrowband C1D2 installation into conduit
|
<None> |
13038 |
Narrowband O2 Sensor to round plug |
Narrowband C1D2 installation to round 4 pin plug
|
<None> |
13020 |
O2 sensor weldment |
|
Valves / DPVs
Image |
EMIT P/Ns |
Description |
For Use With
|
|
12013 |
(050S) VALVE ASSY, 1/2" IN LINE |
|
|
12014 |
(075S) VALVE ASSEMBLY, 0.75" INLINE |
|
|
12015 |
(125S) VALVE ASSY, 1-1/4" IN LINE |
|
|
12016 |
(150S) VALVE ASSY, 1-1/2" IN LINE |
|
<None> |
12118 |
(150A) VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE W/RADIUSED PINTLE |
|
<None> |
12020 |
(150D) VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE |
|
<None> |
12112 |
(150R) VALVE ASSEMBLY, 1.50" INLINE, RADIUS PINTLE |
|
<None> |
12111 |
(125R) VALVE ASSY, 1-1/4" IN LINE W/RADIUSED PINTLE |
|
<None> |
12039 |
VALVE ASSY, 1/2" IN LINE C1D2 |
Same as 12013 but no plug for C1D2 install into conduit
|
<None> |
12040 |
VALVE ASSY, 3/4" IN LINE C1D2 |
Same as 12014 but no plug for C1D2 install into conduit
|
<None> |
12041 |
VALVE ASSY, 1-1/4" IN LINE C1D2 |
Same as 12015 but no plug for C1D2 install into conduit
|
<None> |
12042 |
VALVE ASSY, 1-1/2" IN LINE C1D2 |
Same as 12016 but no plug for C1D2 install into conduit
|
<None> |
12046 |
VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE C1D2 |
Same as 12020 but no plug for C1D2 install into conduit
|
<None> |
12121 |
VALVE ASSY, 1-1/4" IN LINE W/RADIUSED PINTLE C1D2 |
Same as 12111 but no plug for C1D2 install into conduit
|
<None> |
12120 |
VALVE ASSY, 1-1/2" IN LINE W/RADIUSED PINTLE C1D2 |
Same as 12112 but no plug for C1D2 install into conduit
|
<None> |
12119 |
VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE W/RADIUSED PINTLE, C1D2 |
Same as 12118 but no plug for C1D2 install into conduit
|
Thermocouples
Image |
EMIT P/Ns |
Description |
For Use With
|
|
13001 |
THERMOCOUPLE ASSY, TYPE K, 25' W/ 1/2" NPT COMPRESSION |
|
|
13000 |
THERMOCOUPLE ASSY, TYPE K, 50' W/ 1/2" NPT COMPRESSION |
|
|
13035 |
THERMOCOUPLE ASSY, TYPE K, 100' W/ 1/2" NPT COMPRESSION |
|
Other AFRC Sensors
Caption text
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
13208 |
Differential pressure sensor assembly 0-1 PSI with plug |
Catalyst differential pressure
|
<None> |
13207 |
Manifold pressure sensor assembly -30" to 30 PSI with plug |
Manifold pressure
|
|
13201 |
Differential pressure sensor assembly 0-1 PSI without plug |
Same as 13208 but no plug for installation into conduit
|
|
13202 |
Manifold pressure sensor assembly -30" to 30 PSI without plug |
Same as 13207 but no plug for installation into conduit
|
<None> |
13204 |
Thermistor, 20' wire without plug, 1/4" NPT fitting |
Ambient temperature
|
AFRC Harnesses
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15507 |
Wideband O2 harness, armored, 25’ |
EMIT 13019
|
<None> |
15508 |
Wideband O2 harness, armored, 50’ |
EMIT 13019
|
<None> |
15073 |
Narrowband O2 harness, armored, 25’ |
EMIT 13009
|
<None> |
15075 |
Narrowband O2 harness, armored, 50’ |
EMIT 13009
|
<None> |
15077 |
Narrowband O2 harness, armored, 100’ |
EMIT 13009
|
<None> |
15087 |
Narrowband O2 harness, no plug, armored 25’ |
EMIT 13010
|
<None> |
15088 |
Narrowband O2 harness, no plug, armored 50’ |
EMIT 13010
|
<None> |
15089 |
Narrowband O2 harness, no plug, armored 100’ |
EMIT 13010
|
<None> |
15137 |
Narrowband O2 harness for C1D2 circular plug O2 sensor 25' |
EMIT 13038
|
<None> |
15138 |
Narrowband O2 harness for C1D2 circular plug O2 sensor 50' |
EMIT 13038
|
<None> |
15139 |
Narrowband O2 harness for C1D2 circular plug O2 sensor 100' |
EMIT 13038
|
<None> |
15072 |
DPV Harness, armored 25’ |
Any non-C1D2 valve
|
<None> |
15074 |
DPV Harness, armored 50’ |
Any non-C1D2 valve
|
<None> |
15076 |
DPV Harness, armored 100’ |
Any non-C1D2 valve
|
<None> |
15087 |
DPV harness, no plug, armored 25’ |
Any C1D2 valve
|
<None> |
15088 |
DPV harness, no plug, armored 50’ |
Any C1D2 valve
|
<None> |
15089 |
DPV harness, no plug, armored 100’ |
Any C1D2 valve
|
<None> |
15511 |
Power / Comm harness 1 ft |
Any module
|
<None> |
15512 |
Power / Comm harness 10 ft |
Any module
|
<None> |
15513 |
Power / Comm harness 20 ft |
Any module
|
<None> |
15500 |
Sensor harness, armored 25’ |
EMIT 13207 or 12208
|
<None> |
15501 |
Sensor harness, armored 50’ |
EMIT 13207 or 12208
|
<None> |
15503 |
Sensor harness, armored 75’ |
EMIT 13207 or 12208
|
<None> |
15502 |
Sensor harness, armored 100’ |
EMIT 13207 or 12208
|
Speed (Governor)
Modules
Image |
EMIT P/Ns |
Description |
For Use With
|
|
20310 |
Speed control module |
|
Throttle / Mixer Assmblies
Image |
EMIT P/Ns |
Description |
For Use With
|
|
17011-2001 |
CAT3306NA ETB Mixer Assy |
3306 NA CAT
|
|
17011-2002 |
CAT3306TA ETB Mixer Assy |
3306 TA CAT
|
|
14097 |
CAT3406 ETB Assy |
3406NA CAT
|
<None> |
14105 |
CAT3408TA ETB Assy |
3408TA CAT
|
|
14107-0001 |
CAT3408NA ETB Assy |
3408NA CAT
|
|
14085 |
Arrow VRG330 ETB Mixer Assy |
VRG330
|
|
14093 |
Arrow VRG330CF ETB Mixer Assy |
VRG330 CF
|
<None> |
14122 |
Cummins G5.9 ETB Mixer Assy |
Cummins 5.9
|
<None> |
14127 |
Cummins G8.3 ETB Mixer Assy |
Cummins 8.3
|
|
14129 |
Cummins KTA19 ETB Assy |
Cummins KTA-19
|
Mag Pickups
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
13211 |
Standard 2" MPU |
Most small HP engines
|
<None> |
13243 |
3" MPU with weatherpak plug |
3400 series CAT, 300 series CAT, KTA-19
|
External Actuators
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
17010-0002 |
2040 external actuator |
CAT 3408 LE, 3412, other engines with external throttle
|
<None> |
17010-0004 |
Linkage for 2040 |
17010-0002
|
Harnesses
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15646 |
Throttle harness, armored, 25 ft |
Any throttle assembly under "Throttle / Mixer Assemblies"
|
<None> |
15646-0001 |
Throttle harness, armored, 50 ft |
Any throttle assembly under "Throttle / Mixer Assemblies"
|
<None> |
15646-0002 |
Throttle harness, armored, 75 ft |
Any throttle assembly under "Throttle / Mixer Assemblies"
|
<None> |
15550-0002 |
Actuator harness, 10 pin, 50 ft armored |
Heiznmann 10-pin external actuator, Waukesha VHP
|
<None> |
15625-2500 |
Actuator harness, 5 pin, 25 ft armored |
Heiznmann 5-pin external actuator (17010-0002)
|
<None> |
15625-5000 |
Actuator harness, 5 pin, 50 ft armored |
Heiznmann 5-pin external actuator (17010-0002)
|
<None> |
15629-0400 |
4 ft MPU cable f/ std MPU |
EMIT 13211 or 13243 Mag Pickup
|
<None> |
15629-0800 |
8 ft MPU cable f/ std MPU |
EMIT 13211 or 13243 Mag Pickup
|
<None> |
15629-1200 |
12 ft MPU cable f/ std MPU |
EMIT 13211 or 13243 Mag Pickup
|
<None> |
15511 |
Power / Comm harness 1 ft |
Any module
|
<None> |
15512 |
Power / Comm harness 10 ft |
Any module
|
<None> |
15513 |
Power / Comm harness 20 ft |
Any module
|
Panel Switch Kit
Note: This is only used if installing in a non-EMIT panel
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
14361 |
Governor Switch Panel, Horizontal |
|
<None> |
14362 |
Governor Switch Panel, Vertical |
|
Misc Governor Components
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
17113-0011 |
Air Cleaner Bracket, CAT3304/3304B |
3304 and 3304B CAT
|
<None> |
17413-0030 |
Pressure Regulator Support Bracket, CAT3304/3304B |
3304 and 3304B CAT
|
Ignition
Modules
Image |
EMIT P/Ns |
Description |
For Use With
|
|
20270-0002 |
ICM-8 |
Up to 8 cylinder engines
|
|
20270-0003 |
ICM-16 |
Up to 16 cylinder engines
|
Speed and Timing Sensors
Note: Any Ignition installation will use one Flywheel mag pickup and one additional MPU or hall sensor
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
13211 |
Standard 2" MPU |
Most small HP engines
|
<None> |
13242 |
3" MPU to circular connector |
3400, 300 series CAT , KTA-19
|
<None> |
13240-0002 |
330x Hall sensor and bracket |
3304B, 3306B CAT
|
<None> |
13241 |
5/8" Threaded hall sensor |
3400 CAT, Waukesha VHP, Cummins engines if a bushing is used
|
<None> |
13264 |
M12 threaded hall sensor |
Timing disc kit, eg 3306A
|
<None> |
65300-6282-A |
3/4 to 5/8 bushing |
Cummins engines to adapt 13241 to the engine
|
<None> |
20290-0003 |
Aux Pickup, 3:1 |
3300 A CAT, 398 CAT
|
<None> |
20290-0002 |
Aux Pickup, 2:1 |
399 CAT, 379 CAT, 3400 CAT, 3500 CAT
|
Speed and Timing Harnesses
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15629-0400 |
4 ft MPU cable f/ std MPU |
EMIT 13211
|
<None> |
15629-0800 |
8 ft MPU cable f/ std MPU |
EMIT 13211
|
<None> |
15629-1200 |
12 ft MPU cable f/ std MPU |
EMIT 13211
|
<None> |
15654-0800 |
8 ft MPU cable f/ long MPU |
EMIT 13242
|
<None> |
15654-1200 |
12 ft MPU cable f /long MPU |
EMIT 13242
|
<None> |
15654-1600 |
16 ft MPU cable f /long MPU |
EMIT 13242
|
<None> |
15654-2000 |
20 ft MPU cable f /long MPU |
EMIT 13242
|
<None> |
15620-0400 |
Hall sensor harness, 330xB, 4 ft |
EMIT 13240-0002
|
<None> |
15620-0800 |
Hall sensor harness, 330xB, 8 ft |
EMIT 13240-0002
|
<None> |
15620-1200 |
Hall sensor harness, 330xB, 12 ft |
EMIT 13240-0002
|
<None> |
15628-0450 |
Hall sensor harness, 4.5 ft |
EMIT 13241 or 13264
|
<None> |
15628-1000 |
Hall sensor harness, 10 ft |
EMIT 13241 or 13264
|
<None> |
15637-0040 |
Cummins MPU harness, 4 ft |
Stock Cummins Timing Sensor
|
<None> |
15637-0080 |
Cummins MPU harness, 8 ft |
Stock Cummins Timing Sensor
|
<None> |
15637-0120 |
Cummins MPU harness, 12 ft |
Stock Cummins Timing Sensor
|
<None> |
15637-0160 |
Cummins MPU harness, 16 ft |
Stock Cummins Timing Sensor
|
<None> |
15650-0800 |
Aux Pickup harness, 8 ft |
EMIT Aux Pickups
|
<None> |
15650-1200 |
Aux Pickup harness, 12 ft |
EMIT Aux Pickups
|
<None> |
15650-1600 |
Aux Pickup harness, 16 ft |
EMIT Aux Pickups
|
Power/Comm Harness
The power/comm harness is used to connect the ICM to the panel. The unarmored version might be more convenient if running through conduit.
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15633-0251 |
ICM Power/Comm harness, armored, 25 ft |
Any ICM
|
<None> |
15633-0501 |
ICM Power/Comm harness, armored, 50 ft |
Any ICM
|
<None> |
15633-0250 |
ICM Power/Comm harness, unarmored, 25 ft |
Any ICM
|
<None> |
15633-0500 |
ICM Power/Comm harness, unarmored, 50 ft |
Any ICM
|
Coil harnesses
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15639-4120 |
ICM 4-cyl harness A |
|
<None> |
15639-4001 |
ICM 4-cyl harness B |
CAT 3304
|
<None> |
15639-6120 |
ICM 6-cyl harness A |
|
<None> |
15639-6093 |
ICM 6-cyl harness B |
|
<None> |
15639-6068 |
ICM 6-cyl harness C |
|
<None> |
15639-6001 |
ICM 6-cyl harness D |
CAT 3306
|
<None> |
15639-6043 |
ICM 6-cyl harness E |
|
<None> |
15639-6065 |
ICM 6-cyl harness F |
Cummins KTA19
|
<None> |
15639-6095 |
ICM 6-cyl harness G |
CAT 3406
|
<None> |
15639-8120 |
ICM 8-cyl harness A |
CAT 3408
|
<None> |
15639-8150 |
ICM 8-cyl harness B |
CAT 379
|
<None> |
15639-1215 |
ICM 12-cyl harness A |
CAT 398
|
Ignition Coils
Image |
EMIT P/Ns |
Description |
For Use With
|
|
14330-0001 |
Standard ignition coil |
|
<None> |
14330-0002 |
Flanged ignition coil |
Waukesha VHP
|
Secondaries
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
14332-0001 |
Spark Plug Wire, 12in Lead, 4in Est, 7mm, Str/Str F/ CAT 3300 |
3300 CAT
|
<None> |
14332-0007 |
Secondary Lead, Resistive Suppression, CAT 3400 |
3400 CAT
|
<None> |
14332-0005 |
Secondary Lead, Resistive Suppression, ARROW VRG330 |
Arrow VRG 330
|
<None> |
14332-0008 |
Secondary Lead, Resistive Suppression, Cummins G5.9 |
Cummins 5.9
|
<None> |
14332-0009 |
Secondary Lead, Resistive Suppression, Cummins G8.3 |
Cummins 8.3
|
<None> |
14332-0010 |
Secondary Lead, Resistive Suppression, Cummins KTA19 |
Cummins KTA19
|
<None> |
14092-0001 |
Cat300 ignition secondary |
CAT 398 (To be confirmed)
|
<None> |
14332-0011 |
SECONDARY LEAD, RESISTIVE SUPPRESSION, CUMMINS G/GTA855 |
G/GTA855
|
<None> |
14332-0012 |
SECONDARY LEAD, RESISTIVE SUPPRESSION, ARROW VRG220 |
VRG220
|
Spark Plugs
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
14331-0001 |
Spark plug 14mm x 19mm |
3300 CAT, VRG330,
|
<None> |
14331-0005 |
Spark plug f/ CAT 3400 |
3400 CAT
|
<None> |
14331-0006 |
Spark plug f/ Cummins 5.9 |
Cummins 5.9
|
<None> |
14331-0007 |
Spark plug f/ Cummins 8.3 |
Cummins 8.3
|
<None> |
14331-0008 |
Spark plug f/ Cummins KTA19 |
Cummins KTA19
|
Mount Brackets
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
14306 |
Universal Skid mount |
Any application not listed below
|
<None> |
14305-0002 |
ICM1 Mount kit, 330xB |
CAT 3304B,3306B
|
ECU
Modules
Image |
EMIT P/Ns |
Description |
For Use With
|
|
20390 |
ECU Module |
|
Engine End Devices
For Mixer assemblies, see above
For ignition mag pickups and hall sensors, see above
For ignition coils see above
For ignition secondaries see above
For ignition spark plugs see above
For O2 sensors see above
For DPVs see above
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
13062-0001 |
Thermocouple 3' to quick disconnect |
Pre/Post cat temp on ECU
|
<None> |
13063 |
ECU Manifold Pressure sensor |
|
<None> |
13064 |
ECU Oil Pressure sensor |
|
<None> |
13255-0001 |
Thermistor to 1/4" NPT |
Coolant and Oil temp
|
ECU Coil Harness
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15657-0001 |
ECU Coil Harness 6 cyl 33" |
3306B, G855, QSL9
|
<None> |
15657-0003 |
ECU Coil Harness 6 cyl 54" |
3306A
|
<None> |
15657-0005 |
ECU Coil Harness KTA19 |
KTA19
|
ECU Panel Harnesses
The panel harness runs from the ECU back to the panel. The length required depends on how far the ECU is mounted from the panel.
Image |
EMIT P/Ns |
Description |
For Use With
|
<None> |
15656-0001 |
ECU Panel Harness 20' |
|
<None> |
15656-0002 |
ECU Panel Harness 10' |
|
<None> |
15656-0003 |
ECU Panel Harness Injection only 10' |
|
<None> |
15656-0004 |
ECU Panel Harness 28' |
|