Speed Throttle Calibration
From EMIT Controls
Revision as of 22:02, 29 July 2022 by Thomas Peterson (talk | contribs)
The Governor Throttle Calibration page (Pg. 526) can be used to re-calibrate the throttle body. This moves the throttle through its full range of motion and saves the values for the endpoints and also what effort is required to move the throttle. To get to this page, from the Speed controller setup menu select "Throttle Calibration".
The throttle will usually only need to be recalibrated if the throttle is changed. It could also help to recalibrate it if it seems the calibration is bad, such as if the throttle does not show “0%” with the engine is off.
To calibrate, make sure the engine is off and click the “Calibrate Now” button. Wait for about 20 seconds for the calibration to complete.
