Annunciator Fault Event
From EMIT Controls
Revision as of 22:11, 4 August 2022 by Thomas Peterson (talk | contribs)
When an input faults the annunciator will shut down the engine and move to “Faulted” state and the EIM or DCT will generate an alarm event. On the home screen the state will show as faulted. Selecting the alarm event on the alarms screen will bring up the alarm event. The alarm event will list the faulted input and show the previous 60 seconds of sensor data for the faulted sensor as a graph.
Inserting a USB drive enables a button to download a datalog of all the annunciator sensors for the minute before the fault.
