DCT Password Levels
From EMIT Controls
Revision as of 21:39, 6 February 2023 by Thomas Peterson (talk | contribs) (Created page with "The DCT has three password levels: read-only, Setup, and Engineering. The list below shows which settings groups are included under each level. ==Settings that can be changed under read-only== *PID Setpoint/Deadband (if enabled on PID setup page) *Speed setpoint ==Settings that can be changed under Setup== *Engine hour timers reset *AFRC Alarms *Analog input kills (but not sensor settings) *B timer lengths *Buzzer alarm *Custom digital output criteria ==Settings t...")
The DCT has three password levels: read-only, Setup, and Engineering. The list below shows which settings groups are included under each level.
Settings that can be changed under read-only
- PID Setpoint/Deadband (if enabled on PID setup page)
- Speed setpoint
Settings that can be changed under Setup
- Engine hour timers reset
- AFRC Alarms
- Analog input kills (but not sensor settings)
- B timer lengths
- Buzzer alarm
- Custom digital output criteria
Settings that can be changed under Engineering
Everything else
