EIM Overview

EIM Documents and Guides

EIM User Interference

EIM Timers

EIM Alarms

EIM Engine Information

Modbus RTU

Custom Modbus Map

Datalogging

System Settings or Utilities Pages

EIM Software Update

Notes Page

Open Source Software Notice

SD Or Boot Issues

Ethernet

Security Key

Shutdown Logs

Modbus Temporary Disable

Overview

Video available for this topic: https://www.youtube.com/watch?v=GLwC7T6rGMQ

The EMIT Interface Module (EIM) provides an 8” touchscreen display and communication hub for any one module, or multiple modules, connected to the Controller Area Network (CAN) of the EIM. Modules connected to the EIM will automatically populate as buttons on the System Menu screen (Pg. 0) of the display. Selecting any of the module buttons allows for direct interaction with the respective module.

Other functions not directly related to module interaction include the system run signal trigger, security passwords and access, timer management, alarms, date and time, sensor data logging, and MODBUS communications.

The enclosure of the EIM was designed to be installed either externally using the faceplate and the base or within a panel using only the faceplate. If mounting externally, the EIM can accommodate the mounting of any one module within the base of the enclosure.