Annunciator Setup - Custom Digital Out

From EMIT Controls
Revision as of 21:10, 21 July 2022 by Sean Sanders (talk | contribs) (Created page with "The annunciator has the ability to turn the digital outputs on and off based on a user-defined sensor condition. Any digital out that is not in use by another function can have a custom function associated with it. The custom digital out function is configured by selecting "Annunciator Setup", "Outputs Setup", then "Custom Digital Outs". <nowiki>*</nowiki>Insert Image* ''Custom Digital Output Setup'' Select the top button of the page to select an output to configure...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The annunciator has the ability to turn the digital outputs on and off based on a user-defined sensor condition. Any digital out that is not in use by another function can have a custom function associated with it.

The custom digital out function is configured by selecting "Annunciator Setup", "Outputs Setup", then "Custom Digital Outs".

*Insert Image*

Custom Digital Output Setup

Select the top button of the page to select an output to configure. Only outputs that have no function or already have a custom digital out can be selected.

For a given output, select the top button of the lower section to define a condition when the output should be on. This can be any condition dependent on other inputs. Also available is a delay before/after the sensor condition is true/false for the output to activate or deactivate.

Retrieved from "http://data.emittechnologies.com/wiki/index.php?title=Annunciator_Setup_-_Custom_Digital_Out&oldid=242"