All public logs

Combined display of all available logs of EMIT Controls. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 17:22, 29 July 2022 Thomas Peterson talk contribs created page Connecting EDR to EIM with Ethernet (Created page with "Instead of using RS-485, the EDR can be connected to the EIM with an ethernet cable. If an ethernet switch is not present:  Use a crossover ethernet cable between the EDR and EIM If an ethernet switch is present: Use 2 normal ethernet cables from the switch to each the EDR and EIM ===EIM Setup=== #Go to system/Global settings -> Ethernet #Change the type on top to 'Manual' #Set the IP address to 172.16.1.5 #Set the gateway to 172.16.1.6 #Set the sub...")