All public logs
From EMIT Controls
Combined display of all available logs of EMIT Controls. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 15:34, 21 July 2022 Sean Sanders talk contribs created page Ignition Wiring Diagram (Created page with "<nowiki>*</nowiki>Insert Image* <nowiki>*</nowiki>Insert Image*") Tag: Visual edit
- 15:33, 21 July 2022 Sean Sanders talk contribs created page Ignition ICM2 Encoder Visualization (Created page with "For the ICM2, the encoder visualization screen can be accessed by going to “Setup and Testing” from the Ignition Home screen, then clicking “Encoder Position / Cam Information”. This page shows the position of the encoder (camshaft position) and the saved zero point. It can be used to see if the reference cylinder is on the compression or exhaust stroke, and also can be used to see if the calibration was successful (if the red lines are aligned then the flywheel...") Tag: Visual edit
- 15:31, 21 July 2022 Sean Sanders talk contribs created page Ignition Alarms (Created page with "The ICM presents ignition diagnostics in the form of visual tools, user-defined alarms and warnings, and a quick-view for active faults. === ALARMS AND WARNINGS === Adjustable alarms and faults are available on the Ignition Alarms screen (Pg. 407). Alarm thresholds on this screen can be configured at any time to trigger fault conditions for the events listed below. <nowiki>*</nowiki>Insert Image* ''Ignition Alarms Screen'' When an alarm occurs, the “Alarms” butto...") Tag: Visual edit
- 15:29, 21 July 2022 Sean Sanders talk contribs created page Ignition Engineering Adjustments (Created page with "The Engineering Setup screen (Pg. 408) allows adjustments to dwell time, coil startup time, fuel startup time, elevation, and specific gravity. <nowiki>*</nowiki>Insert Image* ''Ignition Engineering Adjustments Screen'' === DWELL TIME ADJUSTMENT === Dwell time is the period of time the ignition coil is charged prior to firing the spark. Dwell times have a direct effect on spark energy and component life. Longer dwell times can provide additional energy to the spark r...") Tag: Visual edit
- 15:27, 21 July 2022 Sean Sanders talk contribs created page Ignition Testing Tools (Created page with "The testing tools described in this section are available from the Setup and Testing screen (Pg. 401). Security access of Setup or Engineering is required. ===ENGINE RUNNING DIAGNOSTICS AND TESTING- ICM1=== The Engine Running Diagnostics and Testing screen (Pg. 420) is used to view the current timing source configuration and identify if there are any issues present. *“Inputs” – Displays the status of the configured input signals *“Teeth” – Displays status of...") Tag: Visual edit
- 15:25, 21 July 2022 Sean Sanders talk contribs created page Ignition Timing Adjustment (Created page with "The active ignition timing is a sum of "Base Timing", which is a fixed manual timing adjustment, and either a prebuilt or custom timing map. *For a prebuilt timing map, which is made for a specific engine, the ignition will adjust timing based on changes to speed and load (if a manifold pressure sensor is present). The map is also adjusted based on user-entered elevation and fuel specific gravity, if known. The Base Timing offsets the timing map some amount if desired. *...") Tag: Visual edit
- 15:24, 21 July 2022 Sean Sanders talk contribs created page Index.php?title=Ignition Timing Adjustment (Created page with "The active ignition timing is a sum of "Base Timing", which is a fixed manual timing adjustment, and either a prebuilt or custom timing map. *For a prebuilt timing map, which is made for a specific engine, the ignition will adjust timing based on changes to speed and load (if a manifold pressure sensor is present). The map is also adjusted based on user-entered elevation and fuel specific gravity, if known. The Base Timing offsets the timing map some amount if desired. *...") Tag: Visual edit
- 15:22, 21 July 2022 Sean Sanders talk contribs created page Ignition Setup (Created page with "After physical installation and wiring is completed, the ICM must be configured prior to operation. To configure, navigate to the Ignition Setup screen (Pg. 402). Security access of Setup or Engineering is required. Note that step 1, “Engine and Timing Setup” is different for ICM1 and ICM2 models. === STEP 1: ENGINE AND TIMING SETUP- ICM 1 === Step 1 of the setup process involves identifying engine parameters and sparking type. * “Cylinder Count” – Number of...") Tag: Visual edit
- 15:12, 21 July 2022 Sean Sanders talk contribs created page Ignition Cylinder Information (Created page with "=== Main Cylinder Information Screened === Note: This screen was superseded in EIM version 2.00. See the page "New Ignition Cylinder Information" for the page(s) on 2.00 and newer. The Cylinder Information screen (Pg. 440) presents ignition information in bar graph form and provides access to additional individual cylinder information. It is accessed by selecting the spark bar graphs on the Ignition Home Screen. <nowiki>*</nowiki>Insert Image* ''Ignition Cylinder Info...") Tag: Visual edit
- 15:08, 21 July 2022 Thomas Peterson talk contribs created page Ignition Home Screen (Created page with "== Ignition Home Screen == The Ignition Home screen (Pg. 400) provides all the necessary information and functionality to quickly observe the system state and access additional diagnostic and setup features. The very top of the screen provides the overall status of the ignition system. The timing box below displays the active timing, and the timing display can be clicked to make adjustments. The center box shows RPM. The lights at the bottom of the screen show the system...")
- 19:26, 20 July 2022 Sean Sanders talk contribs created page File:Callout snapshot2.png
- 19:26, 20 July 2022 Sean Sanders talk contribs uploaded File:Callout snapshot2.png
- 18:55, 20 July 2022 Sean Sanders talk contribs created page Telematics Overview (Created page with " == QuadPack Connect == === Description === Connect is a telematics service for gas compressors which collects data and sends notifications (callout alarms) when equipment starts and stops. There are two devices that send data from a field unit to EMIT servers: # The Dynamic Control Touchscreen (DCT) comes with a built-in cellular modem that can be activated at anytime to start collecting data for analysis and callout services. # The Data Relay module is available for...") Tag: Visual edit
- 18:28, 20 July 2022 Sean Sanders talk contribs created page EDR Overview (Created page with "== Overview == The EDR has a configuration and status page that can be viewed using a phone or computer by connecting to the device over WiFi. This console generally is used on installation to make sure data is collected correctly, or for debugging. == EDR Config Tool == The EDR (EMIT Data Relay) is configured by editing a series of three Excel tables, which are uploaded through the wifi console (see https://forum.emittechnologies.com/knowledgebase/articles/1980972-edr-...") Tag: Visual edit
- 17:37, 20 July 2022 Sean Sanders talk contribs created page DCT Overview (Created page with "== Panel Install Guides == Full panel install guide, CAT3300 series: https://drive.google.com/file/d/0BzOiNHLPWdg1Nm5xd2V2QUMybzg/view?usp=sharing&resourcekey=0-BeKtdVPfXRd9FKF_h0AURg == Modbus == The latest information and register list for the DCT can be seen here: https://drive.google.com/open?id=1uZHGhsb_jMc-kCS1jnT7NDkBjcN0WOxf == Manual == The DCT manual can be viewed or downloaded here: https://drive.google.com/open?id=1QyJhIHLQgWs3TdRcVmFp5m048vKKeY5V == Sof...") Tag: Visual edit
- 17:14, 20 July 2022 Sean Sanders talk contribs created page File:Image.png
- 17:14, 20 July 2022 Sean Sanders talk contribs uploaded File:Image.png
- 16:27, 20 July 2022 Sean Sanders talk contribs created page File:EIM Overview.png
- 16:27, 20 July 2022 Sean Sanders talk contribs uploaded File:EIM Overview.png
- 16:10, 20 July 2022 Sean Sanders talk contribs created page EIM Overview (Created page with "== Overview == Video available for this topic: https://www.youtube.com/watch?v=GLwC7T6rGMQ The EMIT Interface Module (EIM) provides an 8” touchscreen display and communication hub for any one module, or multiple modules, connected to the Controller Area Network (CAN) of the EIM. Modules connected to the EIM will automatically populate as buttons on the System Menu screen (Pg. 0) of the display. Selecting any of the module buttons allows for direct interaction with the...") Tag: Visual edit
- 16:01, 20 July 2022 Sean Sanders talk contribs created page ECU Overview (Created page with "== Overview == EMIT Dynamic Control is a modular solution engineered to meet the wide range of requirements found in air fuel ratio control, engine ignition, compliance monitoring, and compressor protection and control applications. The architecture of the system is based on a single user interface that is capable of operating and managing multiple modules, each with their own primary function. This configuration allows the system to be highly flexible in the approach ne...") Tag: Visual edit
- 15:52, 20 July 2022 Sean Sanders talk contribs created page Speed Overview (Created page with "== Speed(Governor) Overview == Video available for this topic: https://www.youtube.com/watch?v=wzNx_1Ptvis The EMIT Governor module is an electronic speed control system for stationary carbureted natural gas engines. The Governor system consists of two main components: the control board and an electronic throttle body. The control board is intended to be mounted in a panel or EIM enclosure. The throttle body comes in a variety of sizes for different engines, and mounts...") Tag: Visual edit
- 15:30, 20 July 2022 Sean Sanders talk contribs created page AFRC Overview (Created blank page) Tag: Visual edit
- 15:14, 20 July 2022 Sean Sanders talk contribs created page Ignition Installation Guide (Created page with "https://drive.google.com/file/d/15clXhmEJgHOeSvdOKJ7a9EWHjHisDdOb/view?usp=sharing")
- 13:31, 20 July 2022 Thomas Peterson talk contribs created page File:Icm-home.png
- 13:31, 20 July 2022 Thomas Peterson talk contribs uploaded File:Icm-home.png
- 13:28, 20 July 2022 Thomas Peterson talk contribs created page ICM Overview (Created page with "Ignition overview: https://www.youtube.com/watch?v=H8GPSxc_so0 The EMIT Ignition Controller Module (ICM) is an electronically controlled ignition system that features highly accurate and reliable spark control and monitoring capabilities through the use of transistorized inductive technology. The ICM is available in two types: The ICM1 and ICM2, both of which are available in versions with a maximum of 8 or 16 cylinders. The ICM2 is connected directly to the auxiliary d...")
- 22:16, 19 July 2022 User account Sean Sanders talk contribs was created by Thomas Peterson talk contribs
- 21:20, 19 July 2022 Thomas Peterson talk contribs created page MediaWiki:Sidebar (Created page with " * navigation ** mainpage|mainpage-description ** Brain Overview|Brain Overview ** recentchanges-url|recentchanges ** randompage-url|randompage ** helppage|help-mediawiki * SEARCH * TOOLBOX * LANGUAGES")
- 21:17, 19 July 2022 Thomas Peterson talk contribs created page File:Help-icon.jpg
- 21:17, 19 July 2022 Thomas Peterson talk contribs uploaded File:Help-icon.jpg
- 21:14, 19 July 2022 Thomas Peterson talk contribs created page File:Ecu rendering.jpg
- 21:14, 19 July 2022 Thomas Peterson talk contribs uploaded File:Ecu rendering.jpg
- 21:12, 19 July 2022 Thomas Peterson talk contribs created page File:Icm rendering.JPG
- 21:12, 19 July 2022 Thomas Peterson talk contribs uploaded File:Icm rendering.JPG
- 21:10, 19 July 2022 Thomas Peterson talk contribs created page File:Gov rendering.jpg
- 21:10, 19 July 2022 Thomas Peterson talk contribs uploaded File:Gov rendering.jpg
- 21:08, 19 July 2022 Thomas Peterson talk contribs created page File:Afrcsb rendering.png
- 21:08, 19 July 2022 Thomas Peterson talk contribs uploaded File:Afrcsb rendering.png
- 21:06, 19 July 2022 Thomas Peterson talk contribs created page File:20200-EIM.png
- 21:06, 19 July 2022 Thomas Peterson talk contribs uploaded File:20200-EIM.png
- 21:04, 19 July 2022 Thomas Peterson talk contribs created page File:Dct rendering.png
- 21:04, 19 July 2022 Thomas Peterson talk contribs uploaded File:Dct rendering.png
- 20:18, 19 July 2022 Thomas Peterson talk contribs moved page Brain / Annunciator Overview to Brain or Annunciator Overview without leaving a redirect (Remove slash)
- 20:16, 19 July 2022 Thomas Peterson talk contribs created page Brain / Annunciator Overview (Created page with "== Overview == The 20320 Annunciator or Brain is a digital system designed for monitoring and protecting natural gas engines and compressor equipment. The system works by monitoring a variety of inputs and shutting down the engine if an input crosses user-defined shutdown conditions. Additionally, the system monitors, displays, and datalogs the inputs for later user review. The system also contains analog and digital outputs for controlling various processes in the compr...")
- 19:44, 19 July 2022 Thomas Peterson talk contribs created page File:Edr rendering.png
- 19:44, 19 July 2022 Thomas Peterson talk contribs uploaded File:Edr rendering.png
- 19:42, 19 July 2022 Thomas Peterson talk contribs created page File:Connect logo.png
- 19:42, 19 July 2022 Thomas Peterson talk contribs uploaded File:Connect logo.png
- 19:30, 19 July 2022 Thomas Peterson talk contribs deleted page 20320 Brain / Annunciator (content was: "Annunciator overview", and the only contributor was "Thomas Peterson" (talk))
