This page lists parts related to each module category. Navigate to a module section to see parts related to that product.
AFRC
Modules
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
20360 |
AFRC Advanced, Single bank narrowband |
Single bank narrowband (richburn) applications
|
 |
20230 |
AFRC Advanced, Dual bank wideband or narrowband |
Single/Dual wide/narrowband applications
|
|
20235 |
AFRC Advanced, Dual bank narrowband |
Single/Dual narrowband applications
|
O2 Sensors
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
13009 |
Standard Narrowband O2 Sensor (4 pin) |
Normal richburn applications
|
 |
13019 |
Standard Wideband O2 Sensor (6 pin) |
Normal leanburn applications
|
 |
13010 |
Narrowband O2 Sensor to wire leads |
Narrowband C1D2 installation into conduit
|
| <None> |
13038 |
Narrowband O2 Sensor to round plug |
Narrowband C1D2 installation to round 4 pin plug
|
Valves / DPVs
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
12013 |
(050S) VALVE ASSY, 1/2" IN LINE |
|
 |
12014 |
(075S) VALVE ASSEMBLY, 0.75" INLINE |
|
 |
12015 |
(125S) VALVE ASSY, 1-1/4" IN LINE |
|
 |
12016 |
(150S) VALVE ASSY, 1-1/2" IN LINE |
|
| <None> |
12118 |
(150A) VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE W/RADIUSED PINTLE |
|
| <None> |
12020 |
(150D) VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE |
|
| <None> |
12112 |
(150R) VALVE ASSEMBLY, 1.50" INLINE, RADIUS PINTLE |
|
| <None> |
12111 |
(125R) VALVE ASSY, 1-1/4" IN LINE W/RADIUSED PINTLE |
|
| <None> |
12039 |
VALVE ASSY, 1/2" IN LINE C1D2 |
Same as 12013 but no plug for C1D2 install into conduit
|
| <None> |
12040 |
VALVE ASSY, 3/4" IN LINE C1D2 |
Same as 12014 but no plug for C1D2 install into conduit
|
| <None> |
12041 |
VALVE ASSY, 1-1/4" IN LINE C1D2 |
Same as 12015 but no plug for C1D2 install into conduit
|
| <None> |
12042 |
VALVE ASSY, 1-1/2" IN LINE C1D2 |
Same as 12016 but no plug for C1D2 install into conduit
|
| <None> |
12046 |
VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE C1D2 |
Same as 12020 but no plug for C1D2 install into conduit
|
| <None> |
12121 |
VALVE ASSY, 1-1/4" IN LINE W/RADIUSED PINTLE C1D2 |
Same as 12111 but no plug for C1D2 install into conduit
|
| <None> |
12120 |
VALVE ASSY, 1-1/2" IN LINE W/RADIUSED PINTLE C1D2 |
Same as 12112 but no plug for C1D2 install into conduit
|
| <None> |
12119 |
VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE W/RADIUSED PINTLE, C1D2 |
Same as 12118 but no plug for C1D2 install into conduit
|
Thermocouples
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
13001 |
THERMOCOUPLE ASSY, TYPE K, 25' W/ 1/2" NPT COMPRESSION |
|
|
13000 |
THERMOCOUPLE ASSY, TYPE K, 50' W/ 1/2" NPT COMPRESSION |
|
|
13035 |
THERMOCOUPLE ASSY, TYPE K, 100' W/ 1/2" NPT COMPRESSION |
|
Other AFRC Sensors
Caption text
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
13208 |
Differential pressure sensor assembly 0-1 PSI with plug |
Catalyst differential pressure
|
| <None> |
13207 |
Manifold pressure sensor assembly -30" to 30 PSI with plug |
Manifold pressure
|
 |
13201 |
Differential pressure sensor assembly 0-1 PSI without plug |
Same as 13208 but no plug for installation into conduit
|
 |
13202 |
Manifold pressure sensor assembly -30" to 30 PSI without plug |
Same as 13207 but no plug for installation into conduit
|
| <None> |
13204 |
Thermistor, 20' wire without plug, 1/4" NPT fitting |
Ambient temperature
|
AFRC Harnesses
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
15507 |
Wideband O2 harness, armored, 25’ |
EMIT 13019
|
| <None> |
15508 |
Wideband O2 harness, armored, 50’ |
EMIT 13019
|
| <None> |
15073 |
Narrowband O2 harness, armored, 25’ |
EMIT 13009
|
| <None> |
15075 |
Narrowband O2 harness, armored, 50’ |
EMIT 13009
|
| <None> |
15077 |
Narrowband O2 harness, armored, 100’ |
EMIT 13009
|
| <None> |
15087 |
Narrowband O2 harness, no plug, armored 25’ |
EMIT 13010
|
| <None> |
15088 |
Narrowband O2 harness, no plug, armored 50’ |
EMIT 13010
|
| <None> |
15089 |
Narrowband O2 harness, no plug, armored 100’ |
EMIT 13010
|
| <None> |
15137 |
Narrowband O2 harness for C1D2 circular plug O2 sensor 25' |
EMIT 13038
|
| <None> |
15138 |
Narrowband O2 harness for C1D2 circular plug O2 sensor 50' |
EMIT 13038
|
| <None> |
15139 |
Narrowband O2 harness for C1D2 circular plug O2 sensor 100' |
EMIT 13038
|
| <None> |
15072 |
DPV Harness, armored 25’ |
Any non-C1D2 valve
|
| <None> |
15074 |
DPV Harness, armored 50’ |
Any non-C1D2 valve
|
| <None> |
15076 |
DPV Harness, armored 100’ |
Any non-C1D2 valve
|
| <None> |
15087 |
DPV harness, no plug, armored 25’ |
Any C1D2 valve
|
| <None> |
15088 |
DPV harness, no plug, armored 50’ |
Any C1D2 valve
|
| <None> |
15089 |
DPV harness, no plug, armored 100’ |
Any C1D2 valve
|
| <None> |
15511 |
Power / Comm harness 1 ft |
Any module
|
| <None> |
15512 |
Power / Comm harness 10 ft |
Any module
|
| <None> |
15513 |
Power / Comm harness 20 ft |
Any module
|
| <None> |
15500 |
Sensor harness, armored 25’ |
EMIT 13207 or 12208
|
| <None> |
15501 |
Sensor harness, armored 50’ |
EMIT 13207 or 12208
|
| <None> |
15503 |
Sensor harness, armored 75’ |
EMIT 13207 or 12208
|
| <None> |
15502 |
Sensor harness, armored 100’ |
EMIT 13207 or 12208
|
Speed (Governor)
Modules
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
20310 |
Speed control module |
|
Throttle / Mixer Assmblies
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
17011-2001 |
CAT3306NA ETB Mixer Assy |
3306 NA CAT
|
 |
17011-2002 |
CAT3306TA ETB Mixer Assy |
3306 TA CAT
|
 |
14097 |
CAT3406 ETB Assy |
3406NA CAT
|
| <None> |
14105 |
CAT3408TA ETB Assy |
3408TA CAT
|
 |
14107-0001 |
CAT3408NA ETB Assy |
3408NA CAT
|
 |
14085 |
Arrow VRG330 ETB Mixer Assy |
VRG330
|
 |
14093 |
Arrow VRG330CF ETB Mixer Assy |
VRG330 CF
|
| <None> |
14122 |
Cummins G5.9 ETB Mixer Assy |
Cummins 5.9
|
| <None> |
14127 |
Cummins G8.3 ETB Mixer Assy |
Cummins 8.3
|
 |
14129 |
Cummins KTA19 ETB Assy |
Cummins KTA-19
|
Mag Pickups
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
13211 |
Standard 2" MPU |
Most small HP engines
|
| <None> |
13243 |
3" MPU with weatherpak plug |
3400 series CAT, 300 series CAT, KTA-19
|
External Actuators
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
17010-0002 |
2040 external actuator |
CAT 3408 LE, 3412, other engines with external throttle
|
| <None> |
17010-0004 |
Linkage for 2040 |
17010-0002
|
Harnesses
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
15646 |
Throttle harness, armored, 25 ft |
Any throttle assembly under "Throttle / Mixer Assemblies"
|
| <None> |
15646-0001 |
Throttle harness, armored, 50 ft |
Any throttle assembly under "Throttle / Mixer Assemblies"
|
| <None> |
15646-0002 |
Throttle harness, armored, 75 ft |
Any throttle assembly under "Throttle / Mixer Assemblies"
|
| <None> |
15550-0002 |
Actuator harness, 10 pin, 50 ft armored |
Heiznmann 10-pin external actuator, Waukesha VHP
|
| <None> |
15625-2500 |
Actuator harness, 5 pin, 25 ft armored |
Heiznmann 5-pin external actuator (17010-0002)
|
| <None> |
15625-5000 |
Actuator harness, 5 pin, 50 ft armored |
Heiznmann 5-pin external actuator (17010-0002)
|
| <None> |
15629-0400 |
4 ft MPU cable f/ std MPU |
EMIT 13211 or 13243 Mag Pickup
|
| <None> |
15629-0800 |
8 ft MPU cable f/ std MPU |
EMIT 13211 or 13243 Mag Pickup
|
| <None> |
15629-1200 |
12 ft MPU cable f/ std MPU |
EMIT 13211 or 13243 Mag Pickup
|
| <None> |
15511 |
Power / Comm harness 1 ft |
Any module
|
| <None> |
15512 |
Power / Comm harness 10 ft |
Any module
|
| <None> |
15513 |
Power / Comm harness 20 ft |
Any module
|
Panel Switch Kit
Note: This is only used if installing in a non-EMIT panel
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
14361 |
Governor Switch Panel, Horizontal |
|
| <None> |
14362 |
Governor Switch Panel, Vertical |
|
Misc Governor Components
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
17113-0011 |
Air Cleaner Bracket, CAT3304/3304B |
3304 and 3304B CAT
|
| <None> |
17413-0030 |
Pressure Regulator Support Bracket, CAT3304/3304B |
3304 and 3304B CAT
|
Ignition
Modules
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
20270-0002 |
ICM-8 |
Up to 8 cylinder engines
|
|
20270-0003 |
ICM-16 |
Up to 16 cylinder engines
|
Speed and Timing Sensors
Note: Any Ignition installation will use one Flywheel mag pickup and one additional MPU or hall sensor
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
13211 |
Standard 2" MPU |
Most small HP engines
|
| <None> |
13242 |
3" MPU to circular connector |
3400, 300 series CAT , KTA-19
|
| <None> |
13240-0002 |
330x Hall sensor and bracket |
3304B, 3306B CAT
|
| <None> |
13241 |
5/8" Threaded hall sensor |
3400 CAT, Waukesha VHP, Cummins engines if a bushing is used
|
| <None> |
13264 |
M12 threaded hall sensor |
Timing disc kit, eg 3306A
|
| <None> |
65300-6282-A |
3/4 to 5/8 bushing |
Cummins engines to adapt 13241 to the engine
|
Speed and Timing Harnesses
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
15629-0400 |
4 ft MPU cable f/ std MPU |
EMIT 13211
|
| <None> |
15629-0800 |
8 ft MPU cable f/ std MPU |
EMIT 13211
|
| <None> |
15629-1200 |
12 ft MPU cable f/ std MPU |
EMIT 13211
|
| <None> |
15654-0800 |
8 ft MPU cable f/ long MPU |
EMIT 13242
|
| <None> |
15654-1200 |
12 ft MPU cable f /long MPU |
EMIT 13242
|
| <None> |
15654-1600 |
16 ft MPU cable f /long MPU |
EMIT 13242
|
| <None> |
15654-2000 |
20 ft MPU cable f /long MPU |
EMIT 13242
|
| <None> |
15620-0400 |
Hall sensor harness, 330xB, 4 ft |
EMIT 13240-0002
|
| <None> |
15620-0800 |
Hall sensor harness, 330xB, 8 ft |
EMIT 13240-0002
|
| <None> |
15620-1200 |
Hall sensor harness, 330xB, 12 ft |
EMIT 13240-0002
|
| <None> |
15628-0450 |
Hall sensor harness, 4.5 ft |
EMIT 13241 or 13264
|
| <None> |
15628-1000 |
Hall sensor harness, 10 ft |
EMIT 13241 or 13264
|
Power/Comm Harness
The power/comm harness is used to connect the ICM to the panel. The unarmored version might be more convenient if running through conduit.
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
15633-0251 |
ICM Power/Comm harness, armored, 25 ft |
Any ICM
|
| <None> |
15633-0501 |
ICM Power/Comm harness, armored, 50 ft |
Any ICM
|
| <None> |
15633-0250 |
ICM Power/Comm harness, unarmored, 25 ft |
Any ICM
|
| <None> |
15633-0500 |
ICM Power/Comm harness, unarmored, 50 ft |
Any ICM
|
Coil harnesses
| Image |
EMIT P/Ns |
Description |
For Use With
|
| <None> |
15639-4120 |
ICM 4-cyl harness A |
|
| <None> |
15639-4001 |
ICM 4-cyl harness B |
CAT 3304
|
| <None> |
15639-6120 |
ICM 6-cyl harness A |
|
| <None> |
15639-6093 |
ICM 6-cyl harness B |
|
| <None> |
15639-6068 |
ICM 6-cyl harness C |
|
| <None> |
15639-6001 |
ICM 6-cyl harness D |
CAT 3306
|
| <None> |
15639-6043 |
ICM 6-cyl harness E |
|
| <None> |
15639-6065 |
ICM 6-cyl harness F |
Cummins KTA19
|
| <None> |
15639-6095 |
ICM 6-cyl harness G |
CAT 3406
|
| <None> |
15639-8120 |
ICM 8-cyl harness A |
CAT 3408
|
| <None> |
15639-8150 |
ICM 8-cyl harness B |
CAT 379
|
| <None> |
15639-1215 |
ICM 12-cyl harness A |
CAT 398
|
Ignition Coils
| Image |
EMIT P/Ns |
Description |
For Use With
|
 |
14330-0001 |
Standard ignition coil |
|
| <None> |
14330-0002 |
Flanged ignition coil |
Waukesha VHP
|
