EIM User Interference

*Need to display visual*

Display Contents And Operation

Header

• “Home” button – Navigates to home screen of currently viewed module
• “Eng” label – Indicates if valid run signal from the engine is present (“Eng: Run”) or not present (“Eng: Off”)
• Current module label – Displays the module associated with the currently viewed screen
• “Pg.” label – Displays page number associated with currently viewed screen
• “Back” button – Navigates to the previous screen

Footer

• “System Menu” button – Navigates to System Menu screen (Pg. 0)
• “Access:” button – Displays current security access level and navigates to Security Access screen (Pg. 1) to change security level
• “Timers” button – Navigates to Timer Management screen (Pg. 20) and flashes when any timer(s) require attention
• “Alarms” button – Navigates to Alarms screen (Pg. 40) and flashes when there is an active alarm
• Date/Time button – Navigates to the Date/Time screen (Pg. 2) to modify the date and time

Display Active Area

Displays content for the specific screen being viewed

Security Access

The active security access is displayed in the “Access:” button in the footer of the display. To change the security access mode, select the “Access:” button and input the password of the desired security using the keypad. Available security levels include:

Operator – Limited access to system features. No adjustments can be made.

Setup – Access to most system features and settings.

Engineering – Access to all system features including advanced adjustments.

Passwords are laser marked on the USB covers included with each system, or on a paper card. Please contact EMIT Technologies if you have lost or forgotten the passwords.

Changing Setup Password

To change the Setup password from the factory default (serial number + 10), do the following:

While in the Engineering security access mode, go to "System Settings / Utilities", and select "Change Setup Password".

Enter in the desired Setup password

Press the “Submit” button.