EIM Software Update
From EMIT Controls
Revision as of 18:27, 21 July 2022 by Sean Sanders (talk | contribs) (Created page with "Video available for this topic: https://www.youtube.com/watch?v=o9Mf76GIxBA * Using a Windows-based computer, transfer the EMIT-provided EIM software update file to a FAT-formatted USB thumb drive * The file name should be “EIM_update.tar” * Plug the USB thumb drive into the USB A port on the opposite side of the EIM * Within the EIM’s user interface, enter the appropriate password to for either Setup or Engineering security access * From the System Menu screen (...")
Video available for this topic: https://www.youtube.com/watch?v=o9Mf76GIxBA
- Using a Windows-based computer, transfer the EMIT-provided EIM software update file to a FAT-formatted USB thumb drive
- The file name should be “EIM_update.tar”
- Plug the USB thumb drive into the USB A port on the opposite side of the EIM
- Within the EIM’s user interface, enter the appropriate password to for either Setup or Engineering security access
- From the System Menu screen (Pg. 0), navigate to the Software Update screen (Pg. 3) by selecting "System Settings / Utilities" then “Software Update”
- If the USB drive is plugged in and detected, the screen will be displayed as shown below
- Select the “Start Update“ button to begin the update
- The update will take 20-30 seconds and then will restart the EIM, when complete
- After the update, the EIM will restart
- Remove the USB drive when completed
*Insert Image*
