Annunciator Fault & Output Status Screen
From EMIT Controls
Revision as of 22:51, 21 July 2022 by Sean Sanders (talk | contribs) (Created page with "The Annunciator Fault / Output Status Screen, in version 1.96 of the EIM, replaces an earlier version of the screen. This screen is accessed by selecting the left box on the Annunciator Home page. <nowiki>*</nowiki>Insert Image* The status categories on the left of the screen can be selected to change between views on the right side of the screen. Options are: * Faults: Shows which inputs are currently faulted * Timers: Shows status of various timers, including the...")
The Annunciator Fault / Output Status Screen, in version 1.96 of the EIM, replaces an earlier version of the screen.
This screen is accessed by selecting the left box on the Annunciator Home page.
*Insert Image*
The status categories on the left of the screen can be selected to change between views on the right side of the screen. Options are:
- Faults: Shows which inputs are currently faulted
- Timers: Shows status of various timers, including the B timer and load delay timer
- Digital Outputs: Shows current state of each digital output (on or off)
- Speed Control: Shows the mode and current target of the speed control output (if used)
- PID / Control: Shows the state of the PID control loops
- Permissive: Shows status of various permissive
