Annunciator Setup - Input Voltage Alarm: Revision history

From EMIT Controls

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

5 August 2022

4 August 2022

21 July 2022

  • curprev 21:0721:07, 21 July 2022‎ Sean Sanders talk contribs‎ 565 bytes +565‎ Created page with "An alarm can be defined to activate when the input voltage of the annunciator is above or below a certain value. To configure, navigate to "Annunciator Setup", "Input Setup", followed by "Input Voltage". On this page the following options are defined for the input voltage alarm. * Alarm when below: Enter a minimum voltage for the alarm, or 0 for unused * Alarm when above: Enter a maximum voltage for the alarm, or 0 for unused * Duration: Enter the alarm duration before..." Tag: Visual edit
Retrieved from "http://data.emittechnologies.com/wiki/index.php?title=Annunciator_Setup_-_Input_Voltage_Alarm"