View source for Spare Parts Reference

This page lists parts related to each module category. Navigate to a module section to see parts related to that product.

== AFRC ==

===Modules===
{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:20360.jpg|200px]] || 20360 || AFRC Advanced, Single bank narrowband || Single bank narrowband (richburn) applications
|-
| [[File:20230-AFRCA assembly ISO.jpg|200px]] || 20230 || AFRC Advanced, Dual bank wideband or narrowband || Single/Dual wide/narrowband applications
|-
| [[File:20230-AFRCA assembly ISO.jpg|200px]] || 20235 || AFRC Advanced, Dual bank narrowband || Single/Dual narrowband applications
|}


===O2 Sensors===


{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:13009.jpg|200px]] || 13009 || Standard Narrowband O2 Sensor (4 pin) || Normal richburn applications
|-
| [[File:13019.jpg|200px]] || 13019 || Standard Wideband O2 Sensor (6 pin) || Normal leanburn applications
|-
| [[File:13010.jpg|200px]] || 13010 || Narrowband O2 Sensor to wire leads || Narrowband C1D2 installation into conduit
|-
| [[File:13038.JPG|200px]] || 13038 || Narrowband O2 Sensor to round plug || Narrowband C1D2 installation to round 4 pin plug
|-
| <None> || 13020 || O2 sensor weldment || 
|}

===Valves / DPVs===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:12013.jpg|200px]] || 12013 || (050S) VALVE ASSY, 1/2" IN LINE || VRG330, VRG330-CF, G5.9
|-
| [[File:12014.jpg|200px]] || 12014 || (075S) VALVE ASSEMBLY, 0.75" INLINE || 3306 (all), 3304 (all), G8.3
|-
| [[File:12015.jpg|200px]] || 12015 || (125S) VALVE ASSY, 1-1/4" IN LINE || 
|-
| [[File:12016.jpg|200px]] || 12016 || (150S) VALVE ASSY, 1-1/2" IN LINE || 3516 (richburn)
|-
| [[File:12118.jpg|200px]] || 12118 || (150A) VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE W/RADIUSED PINTLE || CG137-8, 3412TA, 3516LE
|-
| <None> || 12020 || (150D) VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE || CG137-12
|-
| <None> || 12112 || (150R) VALVE ASSEMBLY, 1.50" INLINE, RADIUS PINTLE || KTA19, F3524G, 704x
|-
| <None> || 12111 || (125R) VALVE ASSY, 1-1/4" IN LINE W/RADIUSED PINTLE || 3406NA, 3408TA
|-
| <None> || 12039 || VALVE ASSY, 1/2" IN LINE C1D2 || Same as 12013 but no plug for C1D2 install into conduit
|-
| <None> || 12040 || VALVE ASSY, 3/4" IN LINE C1D2 || Same as 12014 but no plug for C1D2 install into conduit
|-
| <None> || 12041 || VALVE ASSY, 1-1/4" IN LINE C1D2 || Same as 12015 but no plug for C1D2 install into conduit
|-
| <None> || 12042 || VALVE ASSY, 1-1/2" IN LINE C1D2 || Same as 12016 but no plug for C1D2 install into conduit
|-
| <None> || 12046 || VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE C1D2 || Same as 12020 but no plug for C1D2 install into conduit
|-
| <None> || 12121 || VALVE ASSY, 1-1/4" IN LINE W/RADIUSED PINTLE C1D2 || Same as 12111 but no plug for C1D2 install into conduit
|-
| <None> || 12120 || VALVE ASSY, 1-1/2" IN LINE W/RADIUSED PINTLE C1D2 || Same as 12112 but no plug for C1D2 install into conduit
|-
| <None> || 12119 || VALVE ASSY, 1-1/2" NPT X 2" DRESSER IN LINE W/RADIUSED PINTLE, C1D2 || Same as 12118 but no plug for C1D2 install into conduit
|}

===Thermocouples===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:13001.jpg|200px]] || 13001 || THERMOCOUPLE ASSY, TYPE K, 25' W/ 1/2" NPT COMPRESSION || 
|-
| [[File:13001.jpg|200px]] || 13000 || THERMOCOUPLE ASSY, TYPE K, 50' W/ 1/2" NPT COMPRESSION || 
|-
| [[File:13001.jpg|200px]] || 13035 || THERMOCOUPLE ASSY, TYPE K, 100' W/ 1/2" NPT COMPRESSION || 
|}


===Other AFRC Sensors===

{| class="wikitable" style="margin:auto"
|+ Caption text
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 13208 || Differential pressure sensor assembly 0-1 PSI with plug || Catalyst differential pressure
|-
| <None> || 13207 || Manifold pressure sensor assembly -30" to 30 PSI with plug || Manifold pressure
|-
| [[File:13201.jpg|200px]] || 13201 || Differential pressure sensor assembly 0-1 PSI without plug || Same as 13208 but no plug for installation into conduit
|-
| [[File:13202.jpg|200px]] || 13202 || Manifold pressure sensor assembly -30" to 30 PSI without plug || Same as 13207 but no plug for installation into conduit
|-
| <None> || 13204 || Thermistor, 20' wire without plug, 1/4" NPT fitting || Ambient temperature
|}

===AFRC Harnesses===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15507 || Wideband O2 harness, armored, 25’ || EMIT 13019
|-
| <None> || 15508 || Wideband O2 harness, armored, 50’ || EMIT 13019
|-
| <None> || 15073 || Narrowband O2 harness, armored, 25’ || EMIT 13009
|-
| <None> || 15075 || Narrowband O2 harness, armored, 50’ || EMIT 13009
|-
| <None> || 15077 || Narrowband O2 harness, armored, 100’ || EMIT 13009
|-
| <None> || 15087 || Narrowband O2 harness, no plug, armored 25’ || EMIT 13010
|-
| <None> || 15088 || Narrowband O2 harness, no plug, armored 50’ || EMIT 13010
|-
| <None> || 15089 || Narrowband O2 harness, no plug, armored 100’ || EMIT 13010
|-
| <None> || 15137 || Narrowband O2 harness for C1D2 circular plug O2 sensor 25'	|| EMIT 13038
|-
| <None> || 15138 || Narrowband O2 harness for C1D2 circular plug O2 sensor 50'	|| EMIT 13038
|-
| <None> || 15139 || Narrowband O2 harness for C1D2 circular plug O2 sensor 100' || EMIT 13038
|-
| <None> || 15072 || DPV Harness, armored 25’ || Any non-C1D2 valve
|-
| <None> || 15074 || DPV Harness, armored 50’ || Any non-C1D2 valve
|-
| <None> || 15076 || DPV Harness, armored 100’ || Any non-C1D2 valve
|-
| <None> || 15087 || DPV harness, no plug, armored 25’ || Any C1D2 valve
|-
| <None> || 15088 || DPV harness, no plug, armored 50’ || Any C1D2 valve
|-
| <None> || 15089 || DPV harness, no plug, armored 100’ || Any C1D2 valve
|-
| <None> || 15511 || Power / Comm harness 1 ft || Any module
|-
| <None> || 15512 || Power / Comm harness 10 ft || Any module
|-
| <None> || 15513 || Power / Comm harness 20 ft || Any module
|-
| <None> || 15500 || Sensor harness, armored 25’ || EMIT 13207 or 12208
|-
| <None> || 15501 || Sensor harness, armored 50’ || EMIT 13207 or 12208
|-
| <None> || 15503 || Sensor harness, armored 75’ || EMIT 13207 or 12208
|-
| <None> || 15502 || Sensor harness, armored 100’ || EMIT 13207 or 12208
|}

===Tetraglass===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 56003 || Tetraglass tape with psa 1.5" x 1/8" x 100' || 
|-
| <None> || 56005 || Tetraglass tape with psa 3" x 1/8" x 100' || 
|-
| <None> || 56007 || Tetraglass tape with psa 3.5" x 1/8" x 100' || 
|-
| <None> || 56067 || Tetraglass tape with psa 1.5" x 1/8" x 100' with holes || 
|-
| <None> || 56009 || Cer-wool 3.0" x 1/2" x 25' || 
|}

== Speed (Governor) ==

===Modules===
{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:Speed rendering.jpg|200px]] || 20310 || Speed control module || 
|}

===Throttle / Mixer Assmblies===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:17011-2001.jpg|200px]] || 17011-2001 || CAT3306NA ETB Mixer Assy || 3306 NA CAT
|-
| [[File:17011-2002.JPG|200px]] || 17011-2002 || CAT3306TA ETB Mixer Assy || 3306 TA CAT
|-
| [[File:14097.jpg|200px]] || 14097 || CAT3406 ETB Assy || 3406NA CAT
|-
| [[File:14105.JPG|200px]] || 14105 || CAT3408TA ETB Assy || 3408TA CAT
|-
| [[File:14107-0001.JPG|200px]] || 14107-0001 || CAT3408NA ETB Assy || 3408NA CAT
|-
| [[File:14085.jpg|200px]] || 14085 || Arrow VRG330 ETB Mixer Assy || VRG330
|-
| [[File:14093.jpg|200px]] || 14093 || Arrow VRG330CF ETB Mixer Assy || VRG330 CF
|-
| [[File:14122.JPG|200px]] || 14122 || Cummins G5.9 ETB Mixer Assy || Cummins 5.9
|-
| [[File:14127.JPG|200px]] || 14127 || Cummins G8.3 ETB Mixer Assy || Cummins 8.3
|-
| [[File:14129b.jpg|200px]] || 14129 || Cummins KTA19 ETB Assy || 	Cummins KTA-19
|-
| <None> || 17011-2006 || Cummins G855NA ETB Mixer Assy || Cummins G855NA
|-
| [[File:17011-2007b.jpg|200px]] || 17011-2007 || Cummins GTA855 ETB Mixer Assy (Note: Not fully itemized) || Cummins GTA855
|-
| <None> || 17011-2008 || Arrow A43 ETB Mixer Assy || Arrow A43/VRG260
|-
| [[File:14453.JPG|200px]] || 14453 || Waukesha F1197G ETB assy || Wauk F1197
|}

===Mag Pickups===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:13211.jpg|200px]] || 13211 || Standard 2" MPU || Most small HP engines
|-
| <None> || 13243 || 3" MPU with weatherpak plug || 3400 series CAT, 300 series CAT, KTA-19
|}

===External Actuators and Related===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 17010-0002 || 2040 external actuator || CAT 3408 LE, 3412, 398, other engines with external throttle
|-
| [[File:17010-0004.JPG|200px]] || 17010-0004 || Arm for 2040 || 17010-0002
|-
| [[File:17010-0005.JPG|200px]] || 17010-0010 || 2080 external actuator. Note: At one time there was a duplicate item nubmer 17010-0005 || Wauk VHP
|-
| [[File:17010-0006.jpg|200px]] || 17010-0006 || Arm for 2080 || 17010-0010
|-
| [[File:17113-0013.jpg|200px]] || 17113-0013 || Servo mount kit for 3412C || CAT 3412 mount for 17010-0002
|-
| [[File:17113-0014.JPG|200px]] || 17113-0014 || Linkage for 2040 on 3412 || CAT 3412 linkage from 17010-0004 to engine
|-
| [[File:17113-0015.jpg|200px]] || 17113-0015 || 7044 Servo mount || 17010-0010 mount on Wauk 7044
|-
| [[File:17113-0016.jpg|200px]] || 17113-0016 || 7044 Servo linkage || Linkage from 17010-0006 to engine
|-
| [[File:17113-0017.JPG|200px]] || 17113-0017 || 398 Servo linkage || Linkage from 17010-0004 to CAT 398 engine
|-
| [[File:17113-0021.JPG|200px]] || 17113-0021 || 398 Servo mount || Mount for CAT 398 for 17010-0002
|}

===Harnesses===
{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15646 || Throttle harness, armored, 25 ft || Any throttle assembly under "Throttle / Mixer Assemblies"
|-
| <None> || 15646-0001 || Throttle harness, armored, 50 ft || Any throttle assembly under "Throttle / Mixer Assemblies"
|-
| <None> || 15646-0002 || Throttle harness, armored, 75 ft || Any throttle assembly under "Throttle / Mixer Assemblies"
|-
| <None> || 15550-0002 || Actuator harness, 10 pin, 50 ft armored || Heiznmann 10-pin external actuator, Waukesha VHP
|-
| <None> || 15625-2500 || Actuator harness, 5 pin, 25 ft armored || Heiznmann 5-pin external actuator (17010-0002)
|-
| <None> || 15625-5000 || Actuator harness, 5 pin, 50 ft armored || Heiznmann 5-pin external actuator (17010-0002)
|-
| <None> || 15629-0400 || 4 ft MPU cable f/ std MPU || EMIT 13211 or 13243 Mag Pickup
|-
| <None> || 15629-0800 || 8 ft MPU cable f/ std MPU || EMIT 13211 or 13243 Mag Pickup
|-
| <None> || 15629-1200 || 12 ft MPU cable f/ std MPU || EMIT 13211 or 13243 Mag Pickup
|-
| <None> || 15511 || Power / Comm harness 1 ft || Any module
|-
| <None> || 15512 || Power / Comm harness 10 ft || Any module
|-
| <None> || 15513 || Power / Comm harness 20 ft || Any module
|}

===Panel Switch Kit===

'''Note: This is only used if installing in a non-EMIT panel'''

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 14361 || Governor Switch Panel, Horizontal || 
|-
| <None> || 14362 || Governor Switch Panel, Vertical || 
|}

===Misc Governor Components===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:17113-0011.JPG|200px]] || 17113-0011 || Air Cleaner Bracket, CAT3304/3304B || 3304 and 3304B CAT
|-
| [[File:17413-0030.JPG|200px]] || 17413-0030 || Pressure Regulator Support Bracket, CAT3304/3304B || 3304 and 3304B CAT
|}

==Ignition==

===Modules===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:20270-ICM ISO4.jpg|200px]] || 20270-0002 || ICM-8 || Up to 8 cylinder engines
|-
| [[File:20270-ICM ISO4.jpg|200px]] || 20270-0003 || ICM-16 || Up to 16 cylinder engines
|}

===Speed and Timing Sensors===

'''Note: Any Ignition installation will use one Flywheel mag pickup and one additional MPU or hall sensor'''

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:13211.jpg|200px]] || 13211 || Standard 2" MPU || Most small HP engines
|-
| [[File:13242.jpg|200px]] || 13242 || 3" MPU to circular connector || 3400, 300 series CAT , KTA-19
|-
| Note: Below image doesn't show bracket and screw [[File:13240-0001.jpg|200px|caption]] || 13240-0002 || 330x Hall sensor, bracket, screw || 3304B, 3306B CAT
|-
| [[File:13241.jpg|200px]] || 13241 || 5/8" Threaded hall sensor || 3400 CAT, Waukesha VHP, Cummins engines if a bushing is used
|-
| <None> || 13264 || M12 threaded hall sensor || Timing disc kit, eg 3306A
|-
| [[File:65300-6282-A.jpg|200px]] || 65300-6282-A || 3/4 to 5/8 bushing || Cummins engines to adapt 13241 to the engine
|-
| [[File:20290-0002.jpg|200px]] || 20290-0003 || Aux Pickup, 3:1 || 3300 A CAT, 398 CAT
|-
| [[File:20290-0002.jpg|200px]] || 20290-0002 || Aux Pickup, 2:1 || 399 CAT, 379 CAT, 3400 CAT, 3500 CAT
|-
| [[File:65300-6338-Aj.jpg|200px]] || 65300-6338-A || Timing Disc Retrofit Kit for 330xA || 3304 A, 3306 A CAT, see also [[330xA Timing Disc Installation]]
|}

===Speed and Timing Harnesses===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15629-0400 || 4 ft MPU cable f/ std MPU || EMIT 13211
|-
| <None> || 15629-0800 || 8 ft MPU cable f/ std MPU || EMIT 13211
|-
| <None> || 15629-1200 || 12 ft MPU cable f/ std MPU || EMIT 13211
|-
| <None> || 15654-0800 || 8 ft MPU cable f/ long MPU || EMIT 13242
|-
| <None> || 15654-1200 || 12 ft MPU cable f /long MPU || EMIT 13242
|-
| <None> || 15654-1600 || 16 ft MPU cable f /long MPU || EMIT 13242
|-
| <None> || 15654-2000 || 20 ft MPU cable f /long MPU || EMIT 13242
|-
| <None> || 15620-0400 || Hall sensor harness, 330xB, 4 ft || EMIT 13240-0002
|-
| <None> || 15620-0800 || Hall sensor harness, 330xB, 8 ft || EMIT 13240-0002
|-
| <None> || 15620-1200 || Hall sensor harness, 330xB, 12 ft || EMIT 13240-0002
|-
| <None> || 15628-0450 || Hall sensor harness, 4.5 ft || EMIT 13241 or 13264
|-
| <None> || 15628-1000 || Hall sensor harness, 10 ft || EMIT 13241 or 13264
|-
| <None> || 15637-0040 || Cummins MPU harness, 4 ft || Stock Cummins Timing Sensor
|-
| <None> || 15637-0080 || Cummins MPU harness, 8 ft || Stock Cummins Timing Sensor
|-
| <None> || 15637-0120 || Cummins MPU harness, 12 ft || Stock Cummins Timing Sensor
|-
| <None> || 15637-0160 || Cummins MPU harness, 16 ft || Stock Cummins Timing Sensor
|-
| <None> || 15650-0800 || Aux Pickup harness, 8 ft || EMIT Aux Pickups
|-
| <None> || 15650-1200 || Aux Pickup harness, 12 ft || EMIT Aux Pickups 
|-
| <None> || 15650-1600 || Aux Pickup harness, 16 ft || EMIT Aux Pickups
|}

===Power/Comm Harness===

The power/comm harness is used to connect the ICM to the panel. The unarmored version might be more convenient if running through conduit.

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15633-0251 || ICM Power/Comm harness, armored, 25 ft || Any ICM
|-
| <None> || 15633-0501 || ICM Power/Comm harness, armored, 50 ft || Any ICM
|-
| <None> || 15633-0250 || ICM Power/Comm harness, unarmored, 25 ft || Any ICM
|-
| <None> || 15633-0500 || ICM Power/Comm harness, unarmored, 50 ft || Any ICM
|}

===Coil harnesses===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15639-4120 || ICM 4-cyl harness A ||  
|-
| <None> || 15639-4001 || ICM 4-cyl harness B || CAT 3304
|-
| <None> || 15639-6120 || ICM 6-cyl harness A ||  
|-
| <None> || 15639-6093 || ICM 6-cyl harness B ||  
|-
| <None> || 15639-6068 || ICM 6-cyl harness C ||  
|-
| <None> || 15639-6001 || ICM 6-cyl harness D || CAT 3306
|-
| <None> || 15639-6043 || ICM 6-cyl harness E ||  
|-
| <None> || 15639-6065 || ICM 6-cyl harness F || Cummins KTA19
|-
| <None> || 15639-6095 || ICM 6-cyl harness G || CAT 3406
|-
| <None> || 15639-8120 || ICM 8-cyl harness A || CAT 3408
|-
| <None> || 15639-8150 || ICM 8-cyl harness B || CAT 379
|-
| <None> || 15639-1215 || ICM 12-cyl harness A || CAT 398
|-
| <None> || 64595-0132 || 3306 Coil Harness bracket || All 3306, for attaching harness. Note old item number was 64595-0133.
|}

===Ignition Coils===
{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:14330-0001.jpg|200px]] || 14330-0001 || Standard ignition coil || 
|-
| [[File:14330-0002.jpg|200px]] || 14330-0002 || Flanged ignition coil || Waukesha VHP
|}

===Secondaries===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 14332-0001 || Spark Plug Wire, 12in Lead, 4in Est, 7mm, Str/Str F/ CAT 3300 || 3300 CAT
|-
| <None> || 14332-0007 || Secondary Lead, Resistive Suppression, CAT 3400 || 3400 CAT
|-
| <None> || 14332-0005 || Secondary Lead, Resistive Suppression, ARROW VRG330 || Arrow VRG 330
|-
| <None> || 14332-0008 || Secondary Lead, Resistive Suppression, Cummins G5.9 || Cummins 5.9
|-
| <None> || 14332-0009 || Secondary Lead, Resistive Suppression, Cummins G8.3 || Cummins 8.3
|-
| <None> || 14332-0010 || Secondary Lead, Resistive Suppression, Cummins KTA19 || Cummins KTA19
|-
| <None> || 14092-0001 || Cat300 ignition secondary	 || CAT 398 (To be confirmed)
|-
| <None> || 14332-0011 || SECONDARY LEAD, RESISTIVE SUPPRESSION, CUMMINS G/GTA855 || G/GTA855
|-
| <None> || 14332-0012|| SECONDARY LEAD, RESISTIVE SUPPRESSION, ARROW VRG220 || VRG220
|}

===Spark Plugs===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 14331-0001 || Spark plug 14mm x 19mm || 3300 CAT, VRG330,
|-
| <None> || 14331-0005 || Spark plug f/ CAT 3400 || 3400 CAT
|-
| <None> || 14331-0006 || Spark plug f/ Cummins 5.9 || Cummins 5.9
|-
| <None> || 14331-0007 || Spark plug f/ Cummins 8.3 || Cummins 8.3
|-
| <None> || 14331-0008 || Spark plug f/ Cummins KTA19 || Cummins KTA19
|}

=== Mount Brackets ===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:14306.jpg|200px]] || 14306 || Universal Skid mount || Any application not listed below
|-
| [[File:14305-0002.JPG|200px]] || 14305-0002 || ICM1 Mount kit, 330xB || CAT 3304B,3306B
|-
| [[File:14305-0003.JPG|200px]] || 14305-0003 || ICM1 Mount kit, Waukesha 704x || Wauk. 7042, 7044
|-
| [[File:14305.JPG|200px]] || 14305 || ICM1 Mount kit, 3306A || CAT 3306A
|-
| [[File:14345.jpg|200px]] || 14346 || ICM1 Mount kit, 3408 || CAT 3308
|}

== ECU ==

===Modules===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:Ecu-rendering.jpg|200px]] || 20390 || ECU Module || 
|}

===Engine End Devices===

For Mixer assemblies, [[Spare_Parts_Reference#Throttle_/_Mixer_Assmblies|see above]]

For ignition mag pickups and hall sensors, [[Spare_Parts_Reference#Speed_and_Timing_Sensors|see above]]

For ignition coils [[Spare_Parts_Reference#Ignition_Coils|see above]]

For ignition secondaries [[Spare_Parts_Reference#Secondaries|see above]]

For ignition spark plugs [[Spare_Parts_Reference#Spark_Plugs|see above]]

For O2 sensors [[Spare_Parts_Reference#O2_Sensors|see above]]

For DPVs [[Spare_Parts_Reference#Valves_/_DPVs|see above]]

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 13062-0001 || Thermocouple 3' to quick disconnect || Pre/Post cat temp on ECU
|-
| <None> || 13063 || ECU Manifold Pressure sensor || 
|-
| <None> || 13064 || ECU Oil Pressure sensor || 
|-
| <None> || 13255-0001 || Thermistor to 1/4" NPT || Coolant and Oil temp 
|}

===ECU Coil Harness===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15657-0001 || ECU Coil Harness 6 cyl 33" || 3306B, G855, QSL9
|-
| <None> || 15657-0003 || ECU Coil Harness 6 cyl 54" || 3306A
|-
| <None> || 15657-0005 || ECU Coil Harness KTA19 || KTA19
|-
| <None> || 64595-0132 || 3306 Coil Harness bracket || All 3306, for attaching harness, used in addition to 15657-xxxx. Note old item number was 64595-0133.
|}

===ECU Panel Harnesses===

The panel harness runs from the ECU back to the panel. The length required depends on how far the ECU is mounted from the panel.

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15656-0001 || ECU Panel Harness 20' || 
|-
| <None> || 15656-0002 || ECU Panel Harness 10' || 
|-
| <None> || 15656-0003 || ECU Panel Harness Injection only 10' || 
|-
| <None> || 15656-0004 || ECU Panel Harness 28' || 
|}

=== ECU Engine Harness ===

Note: Another page shows connector pinouts and parts here: [[ECU_Connector_Pinouts]]

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15655-0001 || ECU Engine Harness 3306B NA || 330xB NA
|-
| <None> || 15655-0003 || ECU Engine Harness 3306A TA || 330xA TA, hall sensor used for CAM disc
|-
| <None> || 15655-0004 || ECU Engine Harness 3306B TA || 330xB TA
|-
| <None> || 15655-0005 || ECU Engine Harness G855 || G855
|-
| <None> || 15655-0006 || ECU Engine Harness KTA-19 || KTA-19
|-
| <None> || 15655-0007 || ECU Engine Harness QSL9 || QSL9
|-
| <None> || 15655-0008 || ECU Engine Harness 330xA NA || 330x NA, hall sensor used for CAM disc
|}

===ECU Exhaust Harness===

For a given engine, the exhaust harness that will be needed depends on what catalyst is used and how it is arranged. Note the lengths mentioned below to help select the harness.

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15658-0001 || ECU Exhaust Harness, manifold mount catalyst, 6' pre / 8' post || Manifold mount catalyst
|-
| <None> || 15658-0002 || ECU exhaust harness, 25' (At one time this was 5' pre O2, 26' post) ||  All sensors at 25'
|-
| <None> || 15658-0003 || ECU exhaust harness, 15' Pre O2, 28' Post || Pre O2 near engine and Post O2 + TCs at cooler
|-
| <None> || 15658-0004 || ECU exhaust harness, 31' || All sensors at 31'
|-
| <None> || 15658-0005 || ECU exhaust harness, 26' || All sensors at 26'
|}

===ECU Mount Kits===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| Note: Fasteners included with kit are not shown here [[File:20393-0006.JPG|200px|caption]] || 20393-0008 || MOUNTING KIT, ECU: CAT3306A || 3306A NA/TA
|-
| [[File:20393-0001.JPG|200px]] || 20393-0001 || ECU MOUNTING KIT: CAT 3306B || 3306B NA/TA
|}

==Panel==

===Panserts===

The pansert is what goes on the inner door to accept the engine control box.

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:64595-0101.JPG|200px]] || 64595-0101 || G3500A3 PANSERT GROUP || [[File:Ps0101T.jpg|200px]]
|-
| [[File:64595-0102.JPG|200px]] || 64595-0102 || G3600A3 PANSERT GROUP || [[File:Ps0102T.jpg|200px]]
|-
| [[File:64595-0103.JPG|200px]] || 64595-0103 || G3500A4 PANSERT GROUP || [[File:Ps0103T.png|200px]]
|-
| [[File:64595-0104.jpg|200px]] || 64595-0104 || G3300A4 PANSERT || [[File:Ps0104T.jpg|200px]]
|-
| [[File:64595-0105.JPG|200px]] || 64595-0105 || CG-137 OCP PANSERT || [[File:Ps0105T.JPG|200px]]
|-
| [[File:64595-0112.JPG|200px]] || 64595-0112 || CG-137 A4-E4 PANSERT GROUP || [[File:Ps0112T.JPG|200px]]
|-
| [[File:64595-0180.JPG|200px]] || 64595-0180 || G3600A4 HMI FULL ENCLOSURE (ENCINF2 578-8670) PANSERT GROUP  || [[File:Ps0180T.jpg|200px]]
|-
| [[File:64595-0188.jpg|200px]]  || 64595-0188 || ESM2 Pansert ||
|-
| [[File:64595-0198.JPG|200px]] || 64595-0198 || G3600A4 BASE HMI (BASE8HMI 578-8668) PANSERT GROUP  || HMI components with no box [[File:Ps0198T.png|200px]]
|-
| [[File:64595-1017.jpg|200px]] || 64595-1021 || ASC Pansert ||
|-
| [[File:64595-1022.jpg|200px]] || 64595-1022 || 15" ESM2 Pansert ||
|-
| [[File:64595-1023.png|200px]] || 64595-1023 || 19" ESM2 Pansert || [[File:Esm2.jpg|200px]]
|}

===Pressure Sensors===

'''Panel Mounted (to wire leads)'''

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 13202 || PRESSURE TRANSDUCER, -14.7 to +30 PSIG || Manifold Pressure
|-
| <None> || 13050 || PRESSURE TRANSDUCER, 0-100 PSIG || 
|-
| <None> || 13051 || PRESSURE TRANSDUCER, 0-300 PSIG || 
|-
| <None> || 13052 || PRESSURE TRANSDUCER, 0-500 PSIG || 
|-
| <None> || 13053 || PRESSURE TRANSDUCER, 0-1000 PSIG || 
|-
| <None> || 13054 || PRESSURE TRANSDUCER, 0-1500 PSIG || 
|-
| <None> || 13055 || PRESSURE TRANSDUCER, 0-2000 PSIG || 
|-
| <None> || 13056 || PRESSURE TRANSDUCER, 0-3000 PSIG || 
|-
| <None> || 13069 || PRESSURE TRANSDUCER, 0-5 PSIG || 
|}

'''Remote Mounted (With plug)'''

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 13207	PRESSURE TRANSDUCER, -14.7 to +30 PSIG WITH PLUG || Manifold Pressure
|-
| <None> || 13244	PRESSURE TRANSDUCER, 0-100 PSIG WITH PLUG || 
|-
| <None> || 13245	PRESSURE TRANSDUCER, 0-300 PSIG WITH PLUG ||
|-
| <None> || 13246	PRESSURE TRANSDUCER, 0-500 PSIG WITH PLUG ||
|-
| <None> || 13247	PRESSURE TRANSDUCER, 0-1000 PSIG WITH PLUG ||
|-
| <None> || 13248	PRESSURE TRANSDUCER, 0-1500 PSIG WITH PLUG ||
|-
| <None> || 13249	PRESSURE TRANSDUCER, 0-2000 PSIG WITH PLUG ||
|-
| <None> || 13250	PRESSURE TRANSDUCER, 0-3000 PSIG WITH PLUG ||
|-
| <None> || 13259	PRESSURE TRANSDUCER, 0-5 PSIG WITH PLUG ||
|}

'''Pressure Sensor Harnesses, for above remote mounted option'''

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 15500 || SENSOR HARNESS 25 FT ARMORED || 
|-
| <None> || 15501 || SENSOR HARNESS 50 FT ARMORED || 
|-
| <None> || 15503 || SENSOR HARNESS 75 FT ARMORED || 
|-
| <None> || 15502 || SENSOR HARNESS 100 FT ARMORED || 
|}

===Other End Devices===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:13001.jpg|200px]] || 13001 || THERMOCOUPLE ASSY, TYPE K, 25' W/ 1/2" NPT COMPRESSION || 
|-
| [[File:13001.jpg|200px]] || 13000 || THERMOCOUPLE ASSY, TYPE K, 50' W/ 1/2" NPT COMPRESSION || 
|-
| [[File:13001.jpg|200px]] || 13035 || THERMOCOUPLE ASSY, TYPE K, 100' W/ 1/2" NPT COMPRESSION || 
|-
| <None> || 13001-0001 || THERMOCOUPLE ASSY, TYPE K, 25' W/ 1/4" NPT COMPRESSION || 
|-
| <None> || 13000-0001 || THERMOCOUPLE ASSY, TYPE K, 50' W/ 1/4" NPT COMPRESSION  || 
|-
| <None> || 13029 || FITTING, 1/2" NPT THERMOCOUPLE COMPRESSION FITTING  || 
|-
| <None> || 13029-0001 || THERMOCOUPLE COMPRESSION FITTING 1/4" NPT  || 
|-
| <None> || 13060 || THERMOWELL, HEAVY DUTY, 1/2" NPT, 6" LENGTH, 316 STAINLESS  || 
|-
| <None> || 13017 || THERMOCOUPLE, TYPE K, 25' (no compression fitting)  || 
|-
| <None> || 13016 || THERMOCOUPLE, TYPE K, 50' (no compression fitting)  || 
|-
| <None> || 13034 || THERMOCOUPLE, TYPE K, 100' (no compression fitting)  || 
|-
| <None> || 13061 || THERMOCOUPLE, TYPE K, 25' STRAIGHT ||                                     
|-
| <None> || 13036 || THERMOCOUPLE ASSY, STRAIGHT, TYPE K, 25' W/ 1/2" NPT COMPRESSION || 
|-
| <None> || 13062 || THERMOCOUPLE, TYPE K, 3' || 
|-
| <None> || 14406-0012	|| RTD CONVERTER, PT100, C1D2, DIN RAIL || 
|-
| <None> || 14406-0013	|| RTD BUS CONNECTOR || use one for every 2x14406-0012 for new install
|-
| <None> || 14406-0009	|| TC CONVERTER, ISOLATED, DIN RAIL || 
|}

===Panel Internal Parts===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:14412-0003.jpg|200px]]  || 14412-0003 || Terminal block relay, C1D2 || All 24v panels
|-
| Note that colors vary [[File:14412-0004.jpg|200px]] || 14412-0004 || Solid state (main power) relay, 12A ||
|-
| <None> || 14412-0006 || Terminal block relay, C1D2, 12v || All 12v panels
|-
| [[File:14412-0008.jpg|200px]] || 14412-0008 || Terminal block relay, C1D2, 24v DPDT || Not commonly used, double pole
|-
| [[File:14406-0002.jpg|200px]] || 14406-0002 || TERMINAL BLOCK, DOUBLE LEVEL || 
|-
| [[File:14406-0005.jpg|200px]] || 14406-0005 || TERMINAL BLOCK, TRIPLE LEVEL || 
|-
| <None> || 14406-0004 || TERMINAL BLOCK JUMPER, DOUBLE TB, 10 POLE || 
|-
| <None> || 14406-0004 || TERMINAL BLOCK JUMPER, DOUBLE TB, 2 POLE, TRIMMED || 
|-
| <None> || 14406-0004 || TERMINAL BLOCK JUMPER, DOUBLE TB, 8 POLE, TRIMMED || 
|-
| <None> || 14406-0004 || TERMINAL BLOCK JUMPER, DOUBLE TB, 9 POLE, TRIMMED || 
|-
| [[File:14406-0010.jpg|200px]] || 14406-0010 || Terminal block with Diode, Double level || 
|-
| <None> || 14428 || Fuse Holder, 1-1/4"x1/4", 30A, 600V || 
|-
| [[File:20132.jpg|200px]] || 20132 || DIN Rail Stop || 
|-
| <None> || 14429-0001	|| Fuse, 1A Fast blow ceramic 1/4" x 1-1/4" || 
|-
| <None> || 14429-0002	|| Fuse 2A || 
|-
| <None> || 14429-0005	|| Fuse 5A || 
|-
| <None> || 14429-0008	|| Fuse 8A || 
|-
| <None> || 14429-0020	|| Fuse 20A || 
|-
| <None> || 14425 || SWITCH, DOOR INTERLOCK, SPDT, C1D2 || Door light switch
|-
| [[File:14389-0006.jpg|200px]] || 14389-0006 || PUSH BUTTON, 30MM, 1xNO, SPRING RETURN, BLACK, C1D2 || Reset switch
|-
| [[File:14389-0005.jpg|200px]] || 14389-0005 || PUSH BUTTON, 30MM, 1xNO, SPRING RETURN, GREEN, C1D2 || Start switch
|-
| <None> || 14389-0007 || PUSH BUTTON, 30MM, 1xNC, SPRING RETURN, RED, C1D2 || Stop switch
|-
| <None> || 14415 || EMERGENCY STOP BUTTON, 30MM, C1D2 || E-Stop
|-
| <None> || 14425-0007 || SEL SW, 1xNO, MAINTAINED, 2 POS || Power switch
|-
| [[File:14425-0005.jpg|200px]] || 14425-0005 || SEL SW, 2xNO, MAINTAINED, 3 POS || Speed mode select switch
|-
| <None> || 14425-0006 || SEL SW, 2xNO, SPRING RETURN, 3 POS, BLACK, C1D2 || Speed +/- switch
|-
| <None> || 14388-0001 || LIGHT TOWER DOME, C1D2 || 
|-
| <None> || 14440-0001 || LIGHT TOWER DOME HARNESS, C1D2 || 
|-
| <None> || 14408 || 6 POSITION GROUND LUG BAR || 
|-
| <None> || 20374-0001 || ANTENNA, RF, CELL, WIFI, GPS || 
|-
| <None> || 14431-0004 || LED LIGHT BAR, C1D2 || 
|-
| [[File:14388-0002.jpg|200px]] || 14388-0002 || PANEL MOUNT, BUZZER, HORN, C1D2 || 
|-
| <None> || 20165-0001 || PANEL FUSE AND FERRULE  REPLACEMENT GROUP ||
|-
| [[File:14425-0008.jpg|200px]] || 14425-0008 || CONTACT BLOCK-LRNO-C1D2, LOGIC REED, H. SEALED, 1NO || Most switches contact block except EStop and Stop
|-
| [[File:14425-0009.jpg|200px]] || 14425-0009 || CONTACT BLOCK-LRNC-C1D2, LOGIC REED, H. SEALED, 1NC || EStop and Stop contact block
|-
| <None> || 14401-0001	 || -14.7-30 PSI, DATA TAG || 
|-
| <None> || 14401-0002	 || 0-100 PSI, DATA TAG || 
|-
| <None> || 14401-0051	 || 0-300 PSI, DATA TAG || 
|-
| <None> || 14401-0004	 || 0-500 PSI, DATA TAG || 
|-
| <None> || 14401-0005	 || 0-1000 PSI, DATA TAG || 
|-
| <None> || 14401-0006	 || 0-1500 PSI, DATA TAG || 
|-
| <None> || 14401-0007	 || 0-2000 PSI, DATA TAG || 
|-
| <None> || 14401-0008	 || 0-3000 PSI, DATA TAG || 
|-
| <None> || 14401-0025	 || DISCHG STG 1, DATA TAG || 
|-
| <None> || 14401-0026	 || DISCHG STG 2, DATA TAG || 
|-
| <None> || 14401-0027	 || DISCHG STG 3, DATA TAG || 
|-
| <None> || 14401-0028	 || COMP OIL PRESS, DATA TAG || 
|-
| <None> || 14401-0029	 || ENG OIL PRESS, DATA TAG || 
|-
| <None> || 14401-0030	 || MANIFOL PRESS, DATA TAG || 
|-
| <None> || 14401-0031	 || MAP LEFT, DATA TAG || 
|-
| <None> || 14401-0032	 || MAP RIGHT, DATA TAG || 
|-
| <None> || 14401-0033	 || SUCTION, DATA TAG || 
|-
| <None> || 14401-0063	 || PRE-STRAINER SUCTION, DATA TAG || 
|-
| <None> || 65300-6350	 || Battery saver kit || Add-on to make panel shut off after unit stops
|-
| <None> || 14385-0002	 || Door latch for ADEM box || 
|-
| <None> || 65300-2231 || Panel Hinge
|-
| <None> || 14385 || Outer door latch
|}

==Mount Kits==

Mount kits are used if installing component(s) on non-EMIT Panels

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:14205.jpg|200px]] || 14205 || Mount Kit, Module Panel || Mounting a module in a panel
|-
| [[File:14206.jpg|200px]] || 14206 || Mount Kit, Module EIM || Mounting a module in an EIM outdoor enclosure
|-
| [[File:14200.jpg|200px]] || 14200 || EIM Panel Mount Kit || Mounting an EIM in a panel
|-
| [[File:14201.JPG|200px]]  || 14201 || EIM indoor mount Kit || Mounting an EIM to side of panel
|-
| [[File:14202.jpg|200px]] || 14202 || EIM outdoor mount Kit || Mounting an EIM to side of panel, with rain cover
|}


==Misc Module Components==

The following components are used on multiple modules. Note that straight plugs are used with DIN modules (Brain, AFRC, etc.) and angled plugs are used with screens (DCT, EIM).

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:20100.jpg|200px]] || 20100 || Module End Cap || AFRC, Speed, EMD, EDT, Brain, Brain+
|-
| <None> || 20104 || End Cap Screw || 20100
|-
| [[File:20114.jpg|200px]] || 20114 || Tray Foot (attaches module to DIN rail) || 
|-
| [[File:20144.jpg|200px]] || 20144 || Screw terminal plug, straight, 2 pin || EDR
|-
| [[File:20112.jpg|200px]] || 20112 || Screw terminal plug, straight, 3 pin || EMD, AFRCL, EDT, EDR
|-
| [[File:20111.jpg|200px]] || 20111 || Screw terminal plug, straight, 4 pin || AFRCA, EMD, AFRCL, Speed, Brain, Brain+
|-
| [[File:20113.jpg|200px]] || 20113 || Screw terminal plug, straight, 5 pin || AFRCA, Brain
|-
| [[File:20110.jpg|200px]] || 20110 || Screw terminal plug, straight, 6 pin || AFRCA, EMD, AFRCL, Speed, Brain, Brain+, EDT
|-
| [[File:20109.jpg|200px]] || 20109 || Screw terminal plug, straight, 7 pin || AFRCA, AFRCL, Speed
|-
| [[File:20325.jpg|200px]] || 20325 || Screw terminal plug, straight, 10 pin || Brain
|-
| [[File:20108.jpg|200px]] || 20108 || Screw terminal plug, angled, 3 pin || EIM, DCT
|-
| <None> || 20107 || Screw terminal plug, angled, 5 pin || EIM, DCT
|-
| <None> || 20106 || Screw terminal plug, angled, 6 pin || Very old EIMs
|}

==Telematics==

===EDR Modules and Kits===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:edr_rendering.png|200px]] || 20410 || EDR Module || 
|-
| <None> || 20017-0013 || EDR Kit for EIM panel || EIM / ETS Panels
|-
| <None> || 20017-0020 || EDR Kit for DE-3000 panel || Altronic DE3000 Panels
|-
| <None> || 20017-0023 || EDR Kit for DD-40 panel || Altronic DD-40 / DD-40NTV Panels
|-
| <None> || 20017-0021 || EDR Kit for Centurion panel || Murphy Centurion Panels
|-
| <None> || 20017-0022 || EDR Kit for TTD panel || Murphy TTD Panels
|-
| <None> || 20017-0024 || EDR Kit, Universal || Includes wire bundles for all types of panels
|}

===Antennas and Related Parts===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:20374-0001.JPG|200px]] || 20374-0001 || Shark fin antenna for Cell/Wifi/GPS || Standard antenna installation (included in EDR kit)
|-
| [[File:20413-0002.JPG|200px]] || 20413-0002 || Shark fin mounting bracket and U bolts || 20374-0001 mounting (included in EDR kit)
|-
| <None> || 20381-0100 || (Old kit) Directional antenna with separate 25' coax and adapters || 
|-
| [[File:20381-0100.JPG|200px]] || 20016-0002 || Directional antenna with about 33' coax || 
|-
| [[File:20381-0011.JPG|200px]] || 20381-0011 || GPS standalone antenna || 
|-
| [[File:20016-5001.JPG|200px]]  || 20016-5001 || Magnetic small antenna || Not commonly used
|-
| [[File:20381-0012.JPG|200px]] || 20381-0012 || 100' coax to N connectors || 
|-
| [[File:20381-0007.JPG|200px]] || 20381-0007 || 33' coax extension, SMA male-male || 
|-
| [[File:20381-0014.JPG|200px]] || 20381-0014 || SMA F-F coupler || 
|-
| [[File:20381-0010.JPG|200px]] || 20381-0010 || N female to SMA Female adapter ||  20381-0012
|-
| [[File:20381-0008.JPG|200px]] || 20381-0008 ||  N male to SMA Female adapter || 
|}

===Modems===

{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| [[File:Modem_sim.jpg|200px]] || 20411-0001 || Verizon modem w/ SIM and antenna jumper || To switch a device to verizon
|-
| [[File:Modem_sim.jpg|200px]] || 20411-0005 || Hologram modem w/ SIM || To switch a device from Verizon to ATT/T-Mobile
|-
| [[File:Modem.jpg|200px]] || 20411-0009 || Hologram modem w/o SIM || To swap a ATT/TMobile modem but keep existing SIM
|-
| [[File:20700-4027.jpg|200px]] || 20700-4027 || Modem jumper || To replace bad jumper
|-
| [[File:20411-0007.JPG|200px]] || 20411-0007 || Satellite Modem Kit with Cable and bracket || To switch a device to satellite
|-
| [[File:20411-0004.JPG|200px]] || 20411-0004 || Satellite modem || Not commonly ordered, would usually use kit above instead
|}

==Vibration Sensor==


{| class="wikitable" style="margin:auto"
|+ 
|-
! Image !! EMIT P/Ns !! Description !! For Use With
|-
| <None> || 20400 || Vibration Sensor Module || 
|}