Annunciator Setup - Input Voltage Alarm

An alarm can be defined to activate when the input voltage of the Brain is above or below a certain value.

To configure, navigate to "Brain", "Input Setup", followed by "Input Voltage". On this page the following options are defined for the input voltage alarm.

• Alarm when below: Enter a minimum voltage for the alarm, or 0 for unused
• Alarm when above: Enter a maximum voltage for the alarm, or 0 for unused
• Duration: Enter the alarm duration before activating
• Alarm Class / Action: Enter the alarm class and action as defined previously
• Battery saver shutdown time: Enter number of minutes of engine downtime that, when reached, turns on the battery saver output. Note that a pin has to be assigned to battery saver at Annunciator Digital Output Function Selection