EDT in DCT update

From EMIT Controls
Revision as of 19:19, 29 July 2022 by Thomas Peterson (talk | contribs) (Created page with "The DCT has an embedded EDT in it that is updated differently than the normal DCT software. These updates are named EDT_xxxx.hex . The current version is shown under the Information -> Software Versions page. === Procedure === *Place the update file on a USB drive *Put the drive in the side USB port of the screen. This port is to the right of the power switch File:Dct-edt.jpg *Cycle power on the screen *After the screen reboots, remove the USB. If you navigate t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The DCT has an embedded EDT in it that is updated differently than the normal DCT software. These updates are named EDT_xxxx.hex . The current version is shown under the Information -> Software Versions page.

Procedure

  • Place the update file on a USB drive
  • Put the drive in the side USB port of the screen. This port is to the right of the power switch

Dct-edt.jpg

  • Cycle power on the screen
  • After the screen reboots, remove the USB. If you navigate to Information -> “Software Versions”, the EDT should now show the new version number.
Retrieved from "http://data.emittechnologies.com/wiki/index.php?title=EDT_in_DCT_update&oldid=601"