EIM Overview: Difference between revisions

From EMIT Controls
No edit summary
 
(42 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Overview ==
See the bottom part of this page for a general overview, or the articles below for specific topics.
Video available for this topic: https://www.youtube.com/watch?v=GLwC7T6rGMQ
 
==EIM Documents and Guides==
 
===Main Articles===
[[EIM User Interference]]
 
[[EIM Timers]]
 
[[EIM Alarms]]
 
[[EIM Engine Information]]
 
[[EIM Datalogging]]
 
[[EIM Config Files]]
 
[[EIM System Settings or Utilities Pages|EIM System Settings or Utilities Pages]]
 
[[EIM Software Update]]
 
[[EIM Notes Page]]
 
===Minor Topics===
 
[[EIM Modbus RTU]]


The EMIT Interface Module (EIM) provides an 8” touchscreen display and communication hub for any one module, or multiple modules, connected to the Controller Area Network (CAN) of the EIM. Modules connected to the EIM will automatically populate as buttons on the System Menu screen (Pg. 0) of the display. Selecting any of the module buttons allows for direct interaction with the respective module.
[[EIM Custom Modbus Map]]


Other functions not directly related to module interaction include the system run signal trigger, security passwords and access, timer management, alarms, date and time, sensor data logging, and MODBUS communications.
[[EIM Open Source Software Notice]]


The enclosure of the EIM was designed to be installed either externally using the faceplate and the base or within a panel using only the faceplate. If mounting externally, the EIM can accommodate the mounting of any one module within the base of the enclosure.
[[EIM SD Or Boot Issues]]


== User Interface ==
[[EIM Ethernet]]
<nowiki>*</nowiki>Need to display visual*


== Display Contents And Operation ==
[[EIM Security Key]]


=== Header ===
[[Previous Shutdown Logs]]


* “Home” button – Navigates to home screen of currently viewed module
[[EIM Modbus Temporary Disable]]
* “Eng” label – Indicates if valid run signal from the engine is present (“Eng: Run”) or not present (“Eng: Off”)
* Current module label – Displays the module associated with the currently viewed screen
* “Pg.” label – Displays page number associated with currently viewed screen
* “Back” button – Navigates to the previous screen


=== Footer ===
== Overview ==


* “System Menu” button – Navigates to System Menu screen (Pg. 0)
[[File:20200-EIM.png]]
* “Access:” button – Displays current security access level and navigates to Security Access screen (Pg. 1) to change security level
* “Timers” button – Navigates to Timer Management screen (Pg. 20) and flashes when any timer(s) require attention
* “Alarms” button – Navigates to Alarms screen (Pg. 40) and flashes when there is an active alarm
* Date/Time button – Navigates to the Date/Time screen (Pg. 2) to modify the date and time


=== Display Active Area ===
Video available for this topic: https://www.youtube.com/watch?v=GLwC7T6rGMQ
Displays content for the specific screen being viewed


== Security Access ==
The EMIT Interface Module (EIM) provides an 8” touchscreen display and communication hub for any one module, or multiple modules, connected to the Controller Area Network (CAN) of the EIM. Modules connected to the EIM will automatically populate as buttons on the System Menu screen (Pg. 0) of the display. Selecting any of the module buttons allows for direct interaction with the respective module.
The active security access is displayed in the “Access:” button in the footer of the display. To change the security access mode, select the “Access:” button and input the password of the desired security using the keypad. Available security levels include:


Operator – Limited access to system features. No adjustments can be made.
Other functions not directly related to module interaction include the system run signal trigger, security passwords and access, timer management, alarms, date and time, sensor data logging, and MODBUS communications.
 
The enclosure of the EIM was designed to be installed either externally using the faceplate and the base or within a panel using only the faceplate. If mounting externally, the EIM can accommodate the mounting of any one module within the base of the enclosure.


Setup – Access to most system features and settings.
=== Specifications ===


Engineering – Access to all system features including advanced adjustments.
'''Power'''


Passwords are laser marked on the USB covers included with each system, or on a paper card. Please contact EMIT Technologies if you have lost or forgotten the passwords.
*12 – 30VDC power supply input range
*10 Watts maximum consumption


== Changing Setup Password ==
'''Environmental'''
To change the Setup password from the factory default (serial number + 10), do the following:


While in the Engineering security access mode, go to "System Settings / Utilities", and select "Change Setup Password".
*Temperature: -40°C to +65°C (-40°F to 149°F)
*Humidity: 0% - 90%, non-condensing


Enter in the desired Setup password
'''Communication'''


Press the “Submit” button
*Controller Area Network (CAN) network for access to additional EMIT ETS modules
*USB host for datalog access and software updates
*RS-485 half-duplex MODBUS RTU

Latest revision as of 20:18, 4 October 2022

See the bottom part of this page for a general overview, or the articles below for specific topics.

EIM Documents and Guides

Main Articles

EIM User Interference

EIM Timers

EIM Alarms

EIM Engine Information

EIM Datalogging

EIM Config Files

EIM System Settings or Utilities Pages

EIM Software Update

EIM Notes Page

Minor Topics

EIM Modbus RTU

EIM Custom Modbus Map

EIM Open Source Software Notice

EIM SD Or Boot Issues

EIM Ethernet

EIM Security Key

Previous Shutdown Logs

EIM Modbus Temporary Disable

Overview

20200-EIM.png

Video available for this topic: https://www.youtube.com/watch?v=GLwC7T6rGMQ

The EMIT Interface Module (EIM) provides an 8” touchscreen display and communication hub for any one module, or multiple modules, connected to the Controller Area Network (CAN) of the EIM. Modules connected to the EIM will automatically populate as buttons on the System Menu screen (Pg. 0) of the display. Selecting any of the module buttons allows for direct interaction with the respective module.

Other functions not directly related to module interaction include the system run signal trigger, security passwords and access, timer management, alarms, date and time, sensor data logging, and MODBUS communications.

The enclosure of the EIM was designed to be installed either externally using the faceplate and the base or within a panel using only the faceplate. If mounting externally, the EIM can accommodate the mounting of any one module within the base of the enclosure.

Specifications

Power

  • 12 – 30VDC power supply input range
  • 10 Watts maximum consumption

Environmental

  • Temperature: -40°C to +65°C (-40°F to 149°F)
  • Humidity: 0% - 90%, non-condensing

Communication

  • Controller Area Network (CAN) network for access to additional EMIT ETS modules
  • USB host for datalog access and software updates
  • RS-485 half-duplex MODBUS RTU
Retrieved from "http://data.emittechnologies.com/wiki/index.php?title=EIM_Overview&oldid=1075"