User contributions for Sean Sanders
From EMIT Controls
21 July 2022
- 17:0117:01, 21 July 2022 diff hist +1,961 N EIM Security Key Created page with "=== Background === For EIM versions 1.98 and above, a special USB security key can be optionally used to lock out the "Engineering" password level of the EIM. The also DCT has very similar functionality with the same key. The key part number is 20221-0001 -- USB SECURITY KEY F/ ETS, and can be ordered from EMIT. The functionality is as follows: Security Key Not Enabled ''-''EIM Security operates normally with passwords ''Security Key Enabled'' -With the security ke..." Tag: Visual edit
- 17:0017:00, 21 July 2022 diff hist −1,560 EIM Overview →Ethernet Tag: Visual edit
- 17:0017:00, 21 July 2022 diff hist +1,541 N EIM Ethernet Created page with "=== Overview === Some EIMs have an ethernet port on the back that can be connected to a customer network. The following serial number ranges have an ethernet port: * 1000 - 1899 * 3203 and newer The following functions are currently supported by the ethernet port: * Modbus TCP (EIM Versions 1.89 and later) Other functions, such as file transfers and remote web access, may be supported in the future. This page covers the setup of the ethernet port. === Ethernet Setu..." Tag: Visual edit
- 16:5916:59, 21 July 2022 diff hist −154 EIM Overview →SD Or Boot Issues Tag: Visual edit
- 16:5816:58, 21 July 2022 diff hist +128 N EIM SD Or Boot Issues Created page with "For addressing and preventing EIM Boot issues, see this document: https://drive.google.com/open?id=0BzOiNHLPWdg1WktkRnNsWmNQdGM" Tag: Visual edit
- 16:5816:58, 21 July 2022 diff hist −1,346 EIM Overview →Open Source Software Notice Tag: Visual edit
- 16:5716:57, 21 July 2022 diff hist +1,309 N EIM Open Source Software Notice Created page with "The software included in this product contains proprietary and confidential copyrighted software developed and owned by EMIT Technologies, Inc. which is distributed subject to the Software License Agreement located in "APPENDIX H. SOFTWARE LICENSE AGREEMENT" of the user manual. This product, and any connected EMIT modules, also include copyrighted open source software that is licensed under the GPL, including FreeRTOS v7.0.1, copies of which are located in "APPENDIX I...." Tag: Visual edit
- 16:5716:57, 21 July 2022 diff hist −1,001 EIM Overview →Notes Page Tag: Visual edit
- 16:5616:56, 21 July 2022 diff hist +981 N EIM Notes Page Created page with "Notes allows manual text documentation for periodic maintenance, emissions testing, catalyst maintenance, part replacement, status records, or any other event. Reach the notes page by selecting "Notes" from the EIM Home Screen. To enter a note, press the “Add” button and type in the note using the on screen keyboard. This function is available in all access levels. After the note is added, the first several words of the note can be viewed directly on the screen. Th..." Tag: Visual edit
- 16:5616:56, 21 July 2022 diff hist −1,179 EIM Overview →Software Update Tag: Visual edit
- 16:5516:55, 21 July 2022 diff hist +1 EIM Overview →System Settings / Utilities Pages Tag: Visual edit
- 16:5416:54, 21 July 2022 diff hist +264 DCT Software Update No edit summary Tag: Visual edit
- 16:5316:53, 21 July 2022 diff hist −297 DCT Software Update No edit summary Tag: Visual edit
- 16:3316:33, 21 July 2022 diff hist −2,708 EIM Overview →Datalogging Tag: Visual edit
- 16:3216:32, 21 July 2022 diff hist +2,689 N EIM Datalogging Created page with "All of the sensors on a given module are logged at all times at 1 minute intervals. These logs can be viewed from the Datalog View page (Pg. 75) and downloaded or deleted from the Datalog Files page (Pg. 75). The files automatically roll over, and store around 1 month of data. Note: for long-term compliance logs, which are stored and downloaded elsewhere, see the article "EMD Compliance Log". === DATALOG VIEWING === The Datalog View page (Pg. 75) can be used to look at..." Tag: Visual edit
- 16:3016:30, 21 July 2022 diff hist −2,329 EIM Overview →Custom Modbus Map Tag: Visual edit
- 16:3016:30, 21 July 2022 diff hist +2,299 N EIM Custom Modbus Map Created page with "=== Background === The EIM contains the sole modbus (RS-485) connection for the entire system. However, each module's data is requested with a unique ID. Additionally, each module has a large number of registers, and for a given application only a small number are actually needed. The EIM contains the feature where a custom modbus map can be uploaded which contains a list of target registers that are reassigned a new register number, and are moved to the EIM's modbus ID..." Tag: Visual edit
- 16:2816:28, 21 July 2022 diff hist −10,408 EIM Overview →Modbus RTU Tag: Visual edit
- 16:2716:27, 21 July 2022 diff hist +10,335 N EIM Modbus RTU Created page with "=== Introduction === This document describes an overview of Modbus and how it is used in the ETS system. Modbus (RTU) can be used to read a variety of data from the ETS system to some sort of Modbus master device, to be used remotely or on-site. A proper understanding of how the items are addressed and scaled in ETS will help ensure your system setup works correctly. === Brief Modbus Overview === Modbus is a serial communication protocol that is designed for reading and..." Tag: Visual edit
- 16:2216:22, 21 July 2022 diff hist −1,674 EIM Overview →Engine Information Page Tag: Visual edit
- 16:2216:22, 21 July 2022 diff hist +1,621 N EIM Engine Information Created page with "The Engine Info screen (Pg. 7) configures and displays engine specific data. The information is available for view in Operator security mode. To edit or modify any of the data, Setup or Engineering security mode is required. Engineering mode is required to modify the engine configuration. *Engine Status – Displays the engine run signal status as either ‘Running’ or ‘Run Signal Not Detected’ based on the run signal auto-detect *Engine Hours – Displays the curr..." Tag: Visual edit
- 16:2216:22, 21 July 2022 diff hist −3,104 EIM Overview →Alarms Overview Tag: Visual edit
- 16:2116:21, 21 July 2022 diff hist +3,073 N Speed Alarms Created page with "The EIM and associated modules are capable of identifying a wide range possible alarm conditions. Depending on the module there are a set of custom and fixed alarms in the system to generate an alarm event for the error condition. See the “ALARMS” section of any of the modules for details on how to configure an alarm. As discussed in the module alarm sections, most alarms can be set up to close the error relay and shutdown the engine on critical alarms (other than an..." Tag: Visual edit
- 16:2116:21, 21 July 2022 diff hist −3,011 EIM Overview →Timers Tag: Visual edit
- 16:2016:20, 21 July 2022 diff hist +2,995 N EIM Timers Created page with "The EIM is capable of running eight (8) general purpose timers and three (3) EMD compliance timers simultaneously. Timers can be viewed, updated, or created from the Timer Management screen (Pg. 20) of the EIM. The screen can be accessed by selecting the “Timers” button in the footer of the display. A security level of Setup or Engineering is required to update or create timers. === CREATING A TIMER === To create a timer, select the any of the available “Add” bu..." Tag: Visual edit
- 16:1716:17, 21 July 2022 diff hist +347 EIM Overview No edit summary
- 16:1116:11, 21 July 2022 diff hist −18 DCT Overview No edit summary Tag: Manual revert
- 16:0916:09, 21 July 2022 diff hist +18 DCT Overview No edit summary
- 16:0916:09, 21 July 2022 diff hist −5,303 DCT Overview →Panel Install Guides Tags: Replaced Visual edit
- 16:0816:08, 21 July 2022 diff hist +2,585 N DCT Panel Switch Connections Created page with "=== Background === * Most panels wire the panel switches to the Brain module - Start, Stop, Reset, Speed Auto, Speed Manual, Speed Increase, and Speed Decrease*Insert Image Here* Normal Switch Wiring Locations * Alternately, a new revision of the DCT adds panel switch wiring to the back of the screen. This allows for less wiring between the inner door and the panel, and frees up the inputs on the Brain to be used for other purposes. <nowiki>*</nowiki>Insert Image Her..." Tag: Visual edit
- 16:0716:07, 21 July 2022 diff hist +725 N DCT USB Format Tool Created page with "The DCT has a USB format tool that can be used to re-format and partition a USB drive. This will help make a drive compatible with all parts of the EMIT system. Warning: Formatting a drive will erase all files previously on the drive To use the tool, perform the following steps: # Enter the Setup or Engineering password under the 'Access' Menu # Navigate to 'Settings' -> 'System / Global Settings' -> 'Format USB Drive' # Put a USB drive in the back of the touchscreen..." Tag: Visual edit
- 16:0616:06, 21 July 2022 diff hist +1,440 N DCT Software Update Created page with "The DCT can have its software updated using a USB drive. To update the software, follow these steps. * Obtain a software update from this location by selecting the latest "DCT_update..." file. Software Updates * Download the file * Insert a USB drive into the computer * Drag the file from the 'Downloads' folder into the USB drive * Eject the drive, then insert into back of screen * Enter the engineering password on the screen * Navigate to "Settings" -> "System Settings..." Tag: Visual edit
- 16:0616:06, 21 July 2022 diff hist +115 N DCT Manual Created page with "The DCT manual can be viewed or downloaded here: https://drive.google.com/open?id=1QyJhIHLQgWs3TdRcVmFp5m048vKKeY5V" Tag: Visual edit
- 16:0516:05, 21 July 2022 diff hist +138 N DCT Modbus Created page with "The latest information and register list for the DCT can be seen here: https://drive.google.com/open?id=1uZHGhsb_jMc-kCS1jnT7NDkBjcN0WOxf" Tag: Visual edit
- 16:0416:04, 21 July 2022 diff hist +157 N DCT Panel Install Guides Created page with "Full panel install guide, CAT3300 series: https://drive.google.com/file/d/0BzOiNHLPWdg1Nm5xd2V2QUMybzg/view?usp=sharing&resourcekey=0-BeKtdVPfXRd9FKF_h0AURg" Tag: Visual edit
- 16:0316:03, 21 July 2022 diff hist +122 DCT Overview No edit summary
- 16:0116:01, 21 July 2022 diff hist +30 DCT Overview No edit summary
- 16:0016:00, 21 July 2022 diff hist −6,908 EDR Overview →Wi-Fi Console Pages Tags: Replaced Visual edit
- 15:5915:59, 21 July 2022 diff hist +44 EDR Overview →Compressor Master Tag: Visual edit
- 15:5115:51, 21 July 2022 diff hist −4 EDR Overview →EDR Documents and Guides
- 15:4915:49, 21 July 2022 diff hist −503 EDR Overview →Connecting Tag: Visual edit
- 15:4715:47, 21 July 2022 diff hist −180 EDR Overview →Troubleshooting Guide Tag: Visual edit
- 15:4715:47, 21 July 2022 diff hist −728 EDR Overview →Internal EDT Update Tag: Visual edit
- 15:4615:46, 21 July 2022 diff hist −794 EDR Overview →Installation Guides Tag: Visual edit
- 15:4515:45, 21 July 2022 diff hist −762 EDR Overview →Field Configuration Tag: Visual edit
- 15:4415:44, 21 July 2022 diff hist −1,915 EDR Overview →EDR Config Tool Tag: Visual edit
- 15:4415:44, 21 July 2022 diff hist +81 EDR Config Tool No edit summary Tag: Visual edit
- 15:4215:42, 21 July 2022 diff hist +1,842 N EDR Config Tool Created page with "The EDR (EMIT Data Relay) is configured by editing a series of three Excel tables, which are uploaded through the wifi console (see https://forum.emittechnologies.com/knowledgebase/articles/1980972-edr-field-configuration ). Alternately, the EDR Config program can be used to create the three tables more quickly. Downloading Program The program can be downloaded here: https://drive.google.com/file/d/1CbfNI8BfQtF0PlDO-t_-Uj2eRFd18c8S/view?usp=sharing After downloading, u..."
- 15:4115:41, 21 July 2022 diff hist +194 EDR Overview No edit summary
- 15:3515:35, 21 July 2022 diff hist −2,515 ICM Overview →Single Cylinder Dropout Test Tag: Visual edit
