User contributions for Thomas Peterson

20:2220:22, 8 May 2024 diff hist +14‎ Annunciator Setup - Custom PID ‎ →‎Adjusting Direction current
20:0520:05, 8 May 2024 diff hist +263‎ Annunciator Setup - Custom PID ‎No edit summary

13:3613:36, 6 May 2024 diff hist +127‎ Remote or Auto Restart ‎ →‎Requirements current

13:1013:10, 11 April 2024 diff hist 0‎ Spare Parts Reference ‎ →‎ECU Exhaust Harness current

15:2715:27, 3 April 2024 diff hist +89‎ Connecting EDR to EIM with Ethernet ‎No edit summary current Tag: Visual edit

14:3914:39, 28 March 2024 diff hist 0‎ EDT stand alone table ‎No edit summary current

19:0919:09, 27 March 2024 diff hist +37‎ EDT stand alone table ‎No edit summary
19:0919:09, 27 March 2024 diff hist 0‎ N File:Edt.jpg ‎No edit summary current

21:1421:14, 26 March 2024 diff hist +98‎ Waukesha VHP Engine Controls ‎ →‎Pinout Reference current
21:1121:11, 26 March 2024 diff hist +222‎ Waukesha VHP Engine Controls ‎ →‎Pinout Reference
21:0821:08, 26 March 2024 diff hist +17‎ Waukesha VHP Engine Controls ‎ →‎Throttle Actuator
21:0821:08, 26 March 2024 diff hist +677‎ Waukesha VHP Engine Controls ‎ →‎Pinout Reference
21:0021:00, 26 March 2024 diff hist +530‎ Waukesha VHP Engine Controls ‎ →‎Pinout Reference
20:5820:58, 26 March 2024 diff hist +722‎ Waukesha VHP Engine Controls ‎ →‎Operating Information
20:5020:50, 26 March 2024 diff hist +117‎ Waukesha VHP Engine Controls ‎ →‎Install Information

19:5319:53, 20 March 2024 diff hist +38‎ Spare Parts Reference ‎ →‎Coil harnesses
19:5219:52, 20 March 2024 diff hist +38‎ Spare Parts Reference ‎ →‎ECU Coil Harness

19:5919:59, 13 March 2024 diff hist +244‎ N EDT stand alone table ‎ Created page with "The EDT module (20350) can be used in a stand alone capacity to translate engine data to modbus without use of an EMIT screen. The Modbus list is found here: [https://drive.google.com/file/d/12hMzQQbGhOkUW418gLoFQXhgKTfeQOfM/view?usp=sharing]"
19:5819:58, 13 March 2024 diff hist +27‎ Other Topics ‎No edit summary current

18:1218:12, 16 February 2024 diff hist +68‎ Waukesha VHP Engine Controls ‎No edit summary
18:1118:11, 16 February 2024 diff hist +26‎ Waukesha VHP Engine Controls ‎ →‎Ignition
18:1118:11, 16 February 2024 diff hist +26‎ Waukesha VHP Engine Controls ‎ →‎Speed Module
17:5017:50, 16 February 2024 diff hist +832‎ Waukesha VHP Engine Controls ‎ →‎Speed Module
17:4217:42, 16 February 2024 diff hist +10‎ Waukesha VHP Engine Controls ‎ →‎Ignition
17:4117:41, 16 February 2024 diff hist +13‎ Waukesha VHP Engine Controls ‎ →‎AFRC
17:4017:40, 16 February 2024 diff hist −1‎ Waukesha VHP Engine Controls ‎ →‎Ignition
17:3917:39, 16 February 2024 diff hist +1,212‎ Waukesha VHP Engine Controls ‎ →‎Ignition
17:3317:33, 16 February 2024 diff hist +52‎ Waukesha VHP Engine Controls ‎ →‎Ordering Information
17:3117:31, 16 February 2024 diff hist +2,330‎ N Waukesha VHP Engine Controls ‎ Created page with "== Overview == EMIT engine control products (AFRC, Ignition, and speed controller) can be used on Waukesha VHP engines of various types. These kits can replace the ESM or upgrade older engines. This page covers ordering, install, and operating information. == Ordering Information == The sections below show what AFRC, Ignition, and governor kit would be selected for different applications, and the item numbers for spare parts. === AFRC === Note that the kit item numb..."
17:1917:19, 16 February 2024 diff hist +34‎ Other Topics ‎No edit summary

20:2620:26, 15 February 2024 diff hist +1,471‎ Panel to ESM(r) Interfacing ‎No edit summary current
20:1820:18, 15 February 2024 diff hist +371‎ Panel to ESM(r) Interfacing ‎ →‎ESM Data Connection
20:1620:16, 15 February 2024 diff hist 0‎ N File:Edt esm.PNG ‎No edit summary current
20:1620:16, 15 February 2024 diff hist +631‎ Panel to ESM(r) Interfacing ‎No edit summary
20:0520:05, 15 February 2024 diff hist +1,623‎ Panel to ESM(r) Interfacing ‎No edit summary
18:1918:19, 15 February 2024 diff hist +2,313‎ N Panel to ESM(r) Interfacing ‎ Created page with "== Overview == The Waukesha ESM (r) is an engine control unit made by Waukesha for their VHP series engines. When a unit with an ESM is connected to an EMIT panel, the panel will use a few signals to control the start, stop, and speed of the engine. Many concepts are similar to connecting to other engines. === Initial Setup === Navigate to Settings - Brain - Outputs Setup - ECU Selection, and select "Waukesha ESM". == Panel to ESM Connections == There are three disc..."
18:0518:05, 15 February 2024 diff hist +33‎ Brain or Annunciator Overview ‎ →‎Other Topics current
18:0018:00, 15 February 2024 diff hist +101‎ Panel to ADEM(r) Interfacing ‎ →‎Start Sequence current
17:5917:59, 15 February 2024 diff hist +1,462‎ Panel to ADEM(r) Interfacing ‎ →‎Start Sequence
15:3715:37, 15 February 2024 diff hist +26‎ Panel to ADEM(r) Interfacing ‎No edit summary

18:1018:10, 31 January 2024 diff hist −42‎ Vibration Overview ‎ →‎Specifications current
17:4817:48, 31 January 2024 diff hist −35‎ Other Topics ‎No edit summary
17:4717:47, 31 January 2024 diff hist −29‎ Other Topics ‎No edit summary
17:4717:47, 31 January 2024 diff hist +119‎ Vibration Overview ‎ →‎Specifications
17:4517:45, 31 January 2024 diff hist −14‎ Main Page ‎ →‎Documentation Categories current
17:4517:45, 31 January 2024 diff hist +124‎ Main Page ‎ →‎Documentation Categories
17:4417:44, 31 January 2024 diff hist +23‎ Vibration Overview ‎No edit summary
17:4417:44, 31 January 2024 diff hist 0‎ N File:Vib sensor.png ‎No edit summary current
17:4317:43, 31 January 2024 diff hist +286‎ Vibration Sensor CAN Wiring ‎No edit summary current
17:4117:41, 31 January 2024 diff hist 0‎ N File:Vib 3.png ‎No edit summary current
17:4117:41, 31 January 2024 diff hist 0‎ N File:Vib 2.png ‎No edit summary current
17:4117:41, 31 January 2024 diff hist 0‎ N File:Vib 1.png ‎No edit summary current
17:4017:40, 31 January 2024 diff hist +695‎ N Vibration Sensor CAN Wiring ‎ Created page with "The EMIT vibration sensor can be wired as a 4-20mA sensor or using a CAN bus. Benefits of using the CAN bus are (1) the panel analog inputs won't be consumed and (2) more detailed data and information will be available. As mentioned in the Vibration Sensor Manual, to wire via CAN the connection must make a single daisy-chain from the panel to each sensor. If a sensor is the end of the chain (only one wire goes into each terminal) then the red termination switch wil..."
17:3717:37, 31 January 2024 diff hist +1,940‎ Vibration Overview ‎No edit summary
17:3617:36, 31 January 2024 diff hist +4‎ N Vibration Overview ‎ Created page with "asdf" Tag: Visual edit
17:3517:35, 31 January 2024 diff hist +39‎ MediaWiki:Sidebar ‎No edit summary current

23:0123:01, 29 January 2024 diff hist +1,084‎ Dual Recycle Setup ‎No edit summary current
17:1217:12, 29 January 2024 diff hist +154‎ Downtime Type ‎No edit summary current

21:4321:43, 26 January 2024 diff hist +82‎ Spare Parts Reference ‎ →‎Panel Internal Parts

17:0517:05, 17 January 2024 diff hist 0‎ Spare Parts Reference ‎ →‎External Actuators and Related
17:0417:04, 17 January 2024 diff hist +64‎ Spare Parts Reference ‎ →‎External Actuators and Related

21:2521:25, 5 January 2024 diff hist +1,414‎ N EDR Loopback Test ‎ Created page with "A loopback test involves setting up the EDR to communicate from its own master to slave port. This tests that both ports are functional. ==Test Instructions== * Disconnect any wires in the EDR pins 3-8 and set aside. (We recommend taping over the wires so they don't short to anything) * With two spare short wires, connect 4-7 and 5-8 600px * Connect to the EDR wifi (See here for instructions) * On the "Modbus Mas..." current
21:1921:19, 5 January 2024 diff hist 0‎ N File:Loopback.png ‎No edit summary current
21:1721:17, 5 January 2024 diff hist +23‎ EDR Overview ‎ →‎Minor Topics current

22:4722:47, 15 December 2023 diff hist +6‎ EDR to 20240 Connection ‎ →‎Background current
19:5819:58, 15 December 2023 diff hist +22‎ EDR to 20240 Connection ‎ →‎Wiring
19:5719:57, 15 December 2023 diff hist 0‎ File:Edr emd.png ‎ Thomas Peterson uploaded a new version of File:Edr emd.png current
19:5519:55, 15 December 2023 diff hist 0‎ N File:Edr emd.png ‎No edit summary
18:3118:31, 15 December 2023 diff hist +290‎ EDR to 20240 Connection ‎ →‎Scaling
18:2118:21, 15 December 2023 diff hist +972‎ EDR to 20240 Connection ‎No edit summary
18:1318:13, 15 December 2023 diff hist +1,452‎ N 20240 EMD Modbus Table ‎ Created page with "{| class="wikitable" |+ |- ! Register !! Description !! Pin(s) !! Offset !! Scale |- | 30001 || Thermocouple 1 Reading || 24-25 || -273 || 0.03125 |- | 30002 || Thermocouple 2 Reading || 26-27 || -273 || 0.03125 |- | 30003 || Thermocouple 3 Reading || 28-29 || -273 || 0.03125 |- | 30004 || Thermocouple 4 Reading || 30-31 || -273 || 0.03125 |- | 30005 || Thermocouple 5 Reading || 32-33 || -273 || 0.03125 |- | 30006 || Thermocouple 6 Reading || 34-35 || -273 || 0.03125 |..." current
18:1118:11, 15 December 2023 diff hist +28‎ Other Topics ‎No edit summary
18:0618:06, 15 December 2023 diff hist −19‎ EDR to 20240 Connection ‎ →‎Input Numbering
18:0418:04, 15 December 2023 diff hist +49‎ EDR to 20240 Connection ‎ →‎Input Numbering
18:0418:04, 15 December 2023 diff hist +1,683‎ EDR to 20240 Connection ‎ →‎Wiring
17:5917:59, 15 December 2023 diff hist 0‎ N File:Emd therm resistor.png ‎No edit summary current
17:5117:51, 15 December 2023 diff hist +1‎ EDR to 20240 Connection ‎No edit summary
17:5117:51, 15 December 2023 diff hist +252‎ EDR to 20240 Connection ‎No edit summary
17:3917:39, 15 December 2023 diff hist +365‎ N EDR to 20240 Connection ‎ Created page with "== Background == The 20240 (EMD) is a module that historically is used for ZZZZ compliance monitoring. Since it has a RS-485 slave port, it can also be used as a generic sensor to modbus translator. In a typical scenario, a 20240 and a few sensors could be added to an old annunciator panel (e.g. TTD or DD-40) to allow the EDR to send the sensor values remotely."
17:3617:36, 15 December 2023 diff hist +29‎ EDR Overview ‎ →‎Minor Topics

17:3517:35, 21 November 2023 diff hist +2,396‎ Blowdown With Recycle Sequence ‎ →‎Sequence Setup current
17:3417:34, 21 November 2023 diff hist +1,095‎ N Blowdown With Recycle Sequence ‎ Created page with "==Overview== The Dynamic Control panels have three options related to relieving pressure on a unit: #Blowdown vent, with a simple vent, usually to atmosphere or combuster #Blowdown to header with recycle, where suction and recycle valves are used to relieve to header #Off skid bypass, where an off-skid on/off valve is used to relieve pressure to the header This article covers option (2). ==Setting Up Valves== Before enabling this option, the valve(s) must be configu..."
17:3317:33, 21 November 2023 diff hist 0‎ N File:Blowdown recycle.png ‎No edit summary current
17:2817:28, 21 November 2023 diff hist +36‎ Brain or Annunciator Overview ‎ →‎Other Topics
17:2817:28, 21 November 2023 diff hist +65‎ Annunciator Blowdown Setup ‎No edit summary current
17:1117:11, 21 November 2023 diff hist +557‎ Troubleshooting ‎ →‎Engine shuts down on fault “DI-27 ADEM RUN STATUS”, even though the ADEM doesn’t show a fault code current
16:5216:52, 21 November 2023 diff hist +174‎ Panel to ADEM(r) Interfacing ‎ →‎Overview
16:5116:51, 21 November 2023 diff hist +16‎ MediaWiki:Sidebar ‎No edit summary
16:5016:50, 21 November 2023 diff hist +19‎ MediaWiki:Sidebar ‎No edit summary
16:4716:47, 21 November 2023 diff hist +7‎ Troubleshooting ‎ →‎Startup fails with “ECU fails to start” but the unit never tries to start (CAT engines)
16:4616:46, 21 November 2023 diff hist +4‎ Troubleshooting ‎ →‎Startup fails with “ECU fails to start” but the unit never tries to start (CAT engines)
16:4616:46, 21 November 2023 diff hist −2‎ Troubleshooting ‎ →‎Startup fails with “ECU fails to start” but the unit never tries to start (CAT engines)
16:4516:45, 21 November 2023 diff hist +252‎ Troubleshooting ‎ →‎Engine shuts down on fault normally, but manual stop causes the shutdown to get stuck
16:4416:44, 21 November 2023 diff hist +519‎ Troubleshooting ‎ →‎Startup fails with “ECU fails to start” but the unit never tries to start (CAT engines)
16:4216:42, 21 November 2023 diff hist +837‎ Panel to ADEM(r) Interfacing ‎ →‎Start / Stop / Fault Control
16:4116:41, 21 November 2023 diff hist +3,176‎ Troubleshooting ‎ →‎Startup fails with “ECU fails to start” but the unit never tries to start (CAT engines)
15:5915:59, 21 November 2023 diff hist +1,090‎ Troubleshooting ‎ →‎Startup fails with “ECU fails to start” but the unit never tries to start (CAT engines)
15:5115:51, 21 November 2023 diff hist +1,333‎ Troubleshooting ‎ →‎Control Issues
15:3715:37, 21 November 2023 diff hist +2,834‎ Troubleshooting ‎ →‎Control Issues

15:3115:31, 16 November 2023 diff hist +129‎ N Vibration Sensor Manual ‎ Created page with "The vibration sensor manual can be found here: https://drive.google.com/file/d/1GtnchWYcN2z88KCwxIXc63ATjVz1AwDg/view?usp=sharing" current
15:3015:30, 16 November 2023 diff hist +29‎ Other Topics ‎No edit summary

21:1121:11, 9 November 2023 diff hist +22‎ EDR Installation Guide ‎No edit summary current
21:1121:11, 9 November 2023 diff hist 0‎ EDR Installation Guide ‎No edit summary

15:1015:10, 2 November 2023 diff hist −31‎ Controls Tips Newsletter Archive ‎ →‎November 2, 2023 current
15:0915:09, 2 November 2023 diff hist +2,111‎ Controls Tips Newsletter Archive ‎No edit summary
14:4814:48, 2 November 2023 diff hist +153‎ Light Tower Work Around ‎No edit summary current
14:4714:47, 2 November 2023 diff hist +691‎ N Light Tower Work Around ‎ Created page with "If an old Brain is swapped out in a panel with a new light tower, the color segments may not work. The Brain will still operate normally otherwise. If a work-around is needed, these steps can be used to get the color segments working. # Remove light tower wires from pins 64-66 (Black, Brown, White). Leave 63 and 67 connected (Blue and Gray). # Add three relays (or use spares in the panel), with each A2- connected to ground and A1+ connected to pins 64,65,66. # On each r..."
14:3214:32, 2 November 2023 diff hist +1,346‎ N Light Tower Change ‎ Created page with "==Overview== In Q4 2023 EMIT is changing from the K30 Banner light tower to K50 series. This new tower will have a built in buzzer which eliminates a separate buzzer component, and also has better visibility in bright sunlight. ==Wiring== The old and new wiring are shown below. File:Lt_old.png File:Lt new.png With the old light tower the tower had a 4-wire harness, with three wires going to pins 64-66 of the brain and the blue wire going to a ground lug. Se..." current
14:2714:27, 2 November 2023 diff hist 0‎ N File:Lt new.png ‎No edit summary current
14:2614:26, 2 November 2023 diff hist 0‎ N File:Lt old.png ‎No edit summary current
14:1914:19, 2 November 2023 diff hist +24‎ Other Topics ‎No edit summary
14:0714:07, 2 November 2023 diff hist +2‎ Adding a Run Status Output ‎No edit summary current
14:0714:07, 2 November 2023 diff hist +70‎ Adding a Run Status Output ‎No edit summary
14:0514:05, 2 November 2023 diff hist +738‎ Adding a Run Status Output ‎No edit summary
14:0314:03, 2 November 2023 diff hist 0‎ N File:Run status custom do.png ‎No edit summary current
13:5713:57, 2 November 2023 diff hist +648‎ N Adding a Run Status Output ‎ Created page with "A run status output is powered on when the unit is running. It can be used to signal some other PLC or device that the unit is running. There are two ways to add the output depending on version, detailed below. ''If the Brain version is at least 2563 and DCT version 1.60'' For new versions, there is a built in option for run status. Navigate to Settings - Brain - Output Setups - Digital Output Function Selection. Select the Digital Out to use for this feature, and sc..."
13:4713:47, 2 November 2023 diff hist +32‎ Brain or Annunciator Overview ‎ →‎Other Topics
13:4213:42, 2 November 2023 diff hist +624‎ Annunciator Digital Output Function Selection ‎No edit summary current
13:3313:33, 2 November 2023 diff hist +16‎ Annunciator Digital Output Function Selection ‎No edit summary

19:3819:38, 30 October 2023 diff hist 0‎ Unit Reports ‎ →‎Multi-Unit Reports current
19:3819:38, 30 October 2023 diff hist −27‎ Unit Reports ‎ →‎Multi-Unit Reports
19:3719:37, 30 October 2023 diff hist +23‎ Portal Overview ‎ →‎Alerts Tab current
19:3619:36, 30 October 2023 diff hist +189‎ Downtime Type ‎ →‎Editing the Down Time Type
19:3519:35, 30 October 2023 diff hist +86‎ Downtime Type ‎No edit summary
19:3419:34, 30 October 2023 diff hist +1,084‎ N Downtime Type ‎ Created page with "== Overview == Several reports on the EMIT Connect Portal will categorize downtime hours into Mechanical or Production caused. The source of this sorting is the "Down Time Type" column of a unit "Alerts" tab. When an alert occurs the site will try and sort the alert based on the description into "Mechanical (Auto-Generated)" or "Production (Auto-Generated)". The sorting is based on hard-coded rules of thumb, but some shutdown descriptions will always be ambiguous. Beca..."
19:3219:32, 30 October 2023 diff hist 0‎ N File:Downtimetype.png ‎No edit summary current
19:2519:25, 30 October 2023 diff hist +19‎ Telematics Overview ‎ →‎Telematics Documents and Guides current

17:2617:26, 25 October 2023 diff hist −3‎ Remote or Auto Restart ‎ →‎Remote or Auto Restart Main Setup Tag: Visual edit
17:2517:25, 25 October 2023 diff hist +1,085‎ Remote or Auto Restart ‎ →‎Remote or Auto Restart Main Setup
17:1817:18, 25 October 2023 diff hist +212‎ Annunciator Bypass Setup ‎ →‎Basic Bypass Setup current
17:1717:17, 25 October 2023 diff hist 0‎ N File:Bypass1b.png ‎No edit summary current
17:1617:16, 25 October 2023 diff hist +160‎ Remote or Auto Restart ‎ →‎Start Sequence
17:1217:12, 25 October 2023 diff hist +11‎ Remote or Auto Restart ‎ →‎Fault Stop Sequence
17:1117:11, 25 October 2023 diff hist −9‎ Remote or Auto Restart ‎ →‎Start Sequence
17:1017:10, 25 October 2023 diff hist +132‎ Remote or Auto Restart ‎ →‎Start Sequence
17:0917:09, 25 October 2023 diff hist −157‎ Remote or Auto Restart ‎ →‎Start Sequence
17:0817:08, 25 October 2023 diff hist +271‎ Remote or Auto Restart ‎ →‎Requirements
16:5216:52, 25 October 2023 diff hist +116‎ Remote or Auto Restart ‎ →‎Overview
16:5116:51, 25 October 2023 diff hist +12‎ Remote or Auto Restart ‎ →‎Remote or Auto Restart Main Setup
16:5116:51, 25 October 2023 diff hist +4‎ Remote or Auto Restart ‎ →‎Remote or Auto Restart Main Setup
16:5016:50, 25 October 2023 diff hist +1,740‎ Remote or Auto Restart ‎ →‎Remote or Auto Restart Main Setup
16:4816:48, 25 October 2023 diff hist 0‎ N File:Restart2.png ‎No edit summary current
16:4816:48, 25 October 2023 diff hist 0‎ N File:Restart1.png ‎No edit summary current
16:4716:47, 25 October 2023 diff hist +8,452‎ N Remote or Auto Restart ‎ Created page with "== Overview == EMIT ETS and Dynamic Control panels can be configured to automate the start and load sequence through settings related to various valves around the skid. If the unit is configured to load automatically, it can also be configured to be started remotely and/or automatically restart on certain faults. This document describes the sequence and configuration for these scenarios. A separate document “DC Valve Setup Guide” covers each valve setup individually..."
16:3916:39, 25 October 2023 diff hist +28‎ Brain or Annunciator Overview ‎ →‎Other Topics

19:4019:40, 18 October 2023 diff hist +33‎ Annunciator Input Calibration ‎ →‎Overview current

21:3521:35, 17 October 2023 diff hist +952‎ N Ignition External Timing Adjustment ‎ Created page with "The manifold pressure input pin of the ICM (4-20mA) can be repurposed to instead act as an external timing adjustment. This can be used to connect 3rd-party devices to the ICM to change timing. This feature requires Ignition version 3801+ and DCT version 1.63.871+. To use, navigate to Settings - Ignition - "External Input as Timing Adjustment". File:TimingAdj screenshot.png To enable the feature, select "Yes" on the top of this page. Next, enter the values that t..." current
21:3021:30, 17 October 2023 diff hist 0‎ N File:TimingAdj screenshot.png ‎No edit summary current
21:2921:29, 17 October 2023 diff hist +41‎ ICM Overview ‎ →‎Ignition Documents and Guides current